Quoted from todler:

Anyone having issues with a ball getting stuck behind the fork ramp on the hyperloop? Updated to the new code at the weekend and it happened a couple of times while playing Boba Fett Escape with Han Solo. Seemed fine with other characters.
Ball sits behind the ramp and does a ball search twice but the forks don't go all the way down (stay up about 5mm above playfield). On the third ball search the ramp goes fully down and releases ball.
This isn't a mechanical issue as it works with no problem on other modes and never happened on previous code.

Quoted from PinballManiac40:

Why are you still running v0.92 when v0.93 has been out for 2 weeks already?

Quoted from dnapac:

.92 burns the 9D board out (gives power to the fork ramp motor). That's why Stern took it down and updated to .93. Call Chas at Stern and they will send out a new board (first make sure I'm right about that board. You should see an obvious burn mark in the center right of the board...around D2.

Quoted from fosaisu:

Yeah, I don't know if your board is burned or not (if the ramps still moving at all, I'd guess not), but that "ramp stays up a bit" thing was definitely a .92 problem. Upgrading to .93 solved it for me. I would try updating first before you call Stern and ask for board replacement. If nothing else, they're going to tell you to upgrade first anyway before they send you a replacement board.

Quoted from pinmister:

JJ is great I just have an issue spending that much on a pinball machine. I have the money but it is about principle to me. The routine price increases from Stern have made buying an LE a difficult pill to swallow. There is a NIB on marketplace for $8500 OBO so I figured maybe a dealer is sitting on one and they want to turn some inventory. It may be wishful thinking but sometimes patience pays off.

Quoted from PinballManiac40:

Did you update to 0.93 yet?

Quoted from PinballManiac40:

Then likely it is. Hope you get one from your distributor quickly.