Voltages are good so I replaced U101 and 102, the sound ROMs, and the BSMT2000. Still have no sound at all whatsoever. Any help fixing this problem would be greatly appreciated.
You're currently viewing posts by Pinsider 1iblind.
Click here to go back to viewing the entire thread.
Voltages are good so I replaced U101 and 102, the sound ROMs, and the BSMT2000. Still have no sound at all whatsoever. Any help fixing this problem would be greatly appreciated.
Quoted from tonyhoff1:Did you test the socket that is up top left next to the other ram chip. I had that socket go bad on me
Are you referring to U4?
Quoted from tonyhoff1:Did you test the socket that is up top left next to the other ram chip. I had that socket go bad on me
I tested U4 and U7 sockets. Those are all good.
I'm reading page 110 in the manual and it says, "Sound data from the EPROMs is read through U19 to the BSMT". Could U19 be what's causing no sound? From the little research I did it appears that it would need to be programmed. Can anyone confirm this? If it does need to be programmed then how would I go about getting that done?
You're currently viewing posts by Pinsider 1iblind.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/star-war-trilogy-no-sound?tu=1iblind and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.