Hi Guys,
Does Star Trek Vault Premium have a shaker motor by default or is it an add-on?
Thanks
You're currently viewing posts by Pinsider zephee.
Click here to go back to viewing the entire thread.
Quoted from GoodOmens:No - you have to buy it. It's an easy drop-in add-on though (get the S.A.M. version). All cabling and pre-drilled holes are in place on the Vault.
That's incorrect. Vault Premium does not come factory with the shaker.
Thanks
Thanks. So the laser is there and the motor is activating. I stuck my phones camera in there when the mulitball started and it definitely looks like theres some lasers in there only I cant seem them on the playfield (video here https://photos.app.goo.gl/NPzGYrhSXVm6nsvn6). I took some picture. It almost seems like the projector is at a bad angle? Does this look normal? Any ideas?
Thanks
MVIMG_20200829_122446 (resized).jpgMVIMG_20200829_123323 (resized).jpgJust to follow up on my laser issue as I was able to fix it. It really was not the angle of the laser (though it was off), it was the laser itself. I took off the apron and was able to verify the laser motor worked fine. Turns out there is a button on the laser mechanism that is being held down by a clamp. That button depresses another button inside the mechanism that 'powers' the laser. It needs to be depressed when the motor spins in order for the laser to shine.
Anyway, it turned out the outer button that is held down by the clamp was broken. It was knocked loose somehow and was not able to depress the inner button while clamped. I had to jury rig it. I just put in the end of a tie rap over the inner button and put the clamp down on that to get it to work.
Seems like a silly system to have since the two buttons are always pressed down.
Fixed now though so think i will enjoy the laser show a few times before tackling my shaker motor problem.
Thanks
MVIMG_20200829_205141 (resized).jpgMVIMG_20200829_205338 (resized).jpgMVIMG_20200829_210058 (resized).jpgQuoted from RC_like_the_cola:If your game is 5 days out of box, you should not be rigging anything. Stern should send you the correct and working part if you call them.
I tried. Got a message when I called the support number on my machine that the suport line was shutdown due to the pandemic and to send an email instead. Sent an email but have not gotten a response yet. I will try again this week.
You're currently viewing posts by Pinsider zephee.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/star-trek-clubmembers-only?tu=zephee and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.