Hey! In the club with my recent ST LE purchase. One issue I’m seeing is upon starting a game the Vengeance ship does its thing but sometimes it selects and starts the mission for me. I’m assuming it could be a switch making when Vengence is shaking. Any insight would be appreciated. Thanks!

2752D70A-7045-4040-B77D-E17C1951E5BD (resized).jpeg

Thanks for the advice. I’ll dive into it tomorrow and report back.

Thanks Nokoro for the link in the post. It was absolutely the drop falling off the ledge. Added two small washers and she plays as she should now. Thanks to you and DaveH for reaching out. I’m also looking for the blackout mod that use to be available. Found one at pinball-mods.com but kind of pricy. Any suggestions? For Kilgon multi ball this is a must IMO. Thanks again! Rob

Good to know! Thanks again.

Best looking LE Stern ever put out! Vengence shakes front to back. Dips down upon defeat. Lighted badges on the head. Those side armor lasers though..

4696D1D2-0394-4669-B525-EAFA8276B46E (resized).jpeg

FCD2E87E-CB6A-45DC-9C0D-A82F5029654D (resized).jpeg

Killer strategy! Gonna try it right now!!

I put two small rubbers under the regular sling rubber. Reduces it almost completely.

So myself and Speedracer773 are both looking for the blackout mod that kapsreiter has previously made. He said he would do a small run if we get enough people interested. I believe 5 is what he required but I’m sure more is better. If anyone is interested reach out to myself or Speedracer773 and we can get this in the works. Thanks!!

During Klingon multiball or whenever the laser is in use is will kill all the GI to make it more of an immersive experience. Very cool ! I think he was around $50 or so. Worth every penny IMO.

Yea Vengence mod is different. Anyone else who’s interested let us know !

Right on. Count me in. Seems to be interest for sure. PM coming. Thanks again for doing this.

The drop target shelf plastic can crack and cause this. I super glued mine and put a little clear scotch tape on it. Works perfect now.

Props to kapsreiter for rerunning the blackout mod. Put mine in today. Easy to install and soooooo cool! Thanks again man.

This is common with any drop target really when you hit it dead on with velocity.

These are the ones I have for my LE! They look great.
https://www.pingraffix.com/star-trek

Nothing to do with either. The bracket that holds the coil needs to be tweaked a bit. Centers the coil better for no hum.

Unless you’re gear is ancient then by all means replace.

I had issues with fuses blowing and all kinds of wonky stuff. I took the ground braid out of the equation with the lockdown bar and haven’t had an issue since. Plays 100% !!