(Topic ID: 285021)

Stand up target = air balls

By Sixmillion

1 year ago

Topic Stats

  • 6 posts
  • 4 Pinsiders participating
  • Latest reply 1 year ago by Sixmillion
  • No one calls this topic a favorite


Linked Games

You're currently viewing posts by Pinsider sixmillion.
Click here to go back to viewing the entire thread.

#1 1 year ago

I am having trouble with a lot of air balls when hitting the stand up target on my Ironman pinball machine. There are 4 stand up targets but only one is doing this. The air balls are occurring about 80% of the time. I am concerned something will eventually break. Is there a way to fix this behaviour?

#3 1 year ago
Quoted from schudel5:

Compare it to the ones that are fine. Chances are either the target foam between the target face and back mount is missing or the back mount bracket is bent back. You want to make sure the foam is there, but more importantly, that the target is perpendicular to the playfield or slightly forward of perpendicular. You might need to bend the target to get it right.

Yes the foam is there, I am figuring that I have to bend it forward some, what is the best way to do this without breaking it?

#6 1 year ago
Quoted from slochar:

Remove target from under playfield, if switch stack is screwed into the bracket, remove switch stack, 2 pairs of pliers to bent slightly. If switch stack is riveted same thing but be careful with the switch stack.
It will probably bend back over time, if there's space you can use reinforced standups instead - pinball resource sells one with a rib on it as do possibly other vendors like marcospec. It's a Capcom pinball design.
The disadvantage to beefed up targets is that instead of the bracket bending, it starts to rip out of the playfield. If you find old discussions of twilight zone's slot machine target you can see all the discussions of solutions over the years for this type of issue.
If the original stern brackets have a stiffening rib in them and it's stretched/separated probably best to replace the bracket vs. bending, based on the subsequent post about the swinks bracket.

Dam this is a brand new Ironman vault just purchased and unboxed a couple of weeks ago.

You're currently viewing posts by Pinsider sixmillion.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside