Would spray painting wire-ramps really be a problem? In the past, I have only powder coated wire ramps, and it was fairly easy to get it done, and not too expensive but took time and the shipping both directions. It got me thinking... Seeing that the ball has very little contact with the wire ramp itself, perhaps a simpler approach would work just as well. If I used an automotive spray paint adhesive followed by a couple coats of auto spray color and then a coat of clear, followed by baking at low heat for a few hours to harden it up, would this work just as well?

I did this for an apron a couple of years ago and it worked great. Anyone care to talk me out of DIY.... 8-)

You're currently viewing posts by Pinsider Markharris2000.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

This page was printed from https://pinside.com/pinball/forum/topic/spray-verus-power-coat-ramps?tu=Markharris2000 and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.