Quoted from SpookyBug:We did upgrade to metal geared servos!
Are any of the servos named "Tom"?
Quoted from SpookyBug:We did upgrade to metal geared servos!
Are any of the servos named "Tom"?
Quoted from Jesterfunhouse:Are any of the servos named "Tom"?
That's in the Mature Mode.
I have CE #160. First Spooky game, played halloween @ the colorado pinball show, was underwhelmed. But my wife really wanted a scooby themed pin after we got our first and was super excited after the first trailer.
Quoted from Beechwood:My spooky feels like a wine bottle and my last $tern felt like a beer can. And as far as problems, I must be lucky because I have had almost no reason to take the glass off in 5 months. Congrats on your grab, SD looks amazing.
While I can't compare the spooky yet, the WOZ I got the Mrs for christmas is built like a brick shithouse compared to the SW Prem. it almost killed my buddy and I getting it down stairs (my dad [65] tapped out after helping get it across the yard to the door)
Quoted from CurtisC:I have CE #160. First Spooky game, played halloween @ the colorado pinball show, was underwhelmed. But my wife really wanted a scooby themed pin after we got our first and was super excited after the first trailer.
While I can't compare the spooky yet, the WOZ I got the Mrs for christmas is built like a brick shithouse compared to the SW Prem. it almost killed my buddy and I getting it down stairs (my dad [65] tapped out after helping get it across the yard to the door)
He was a smart man. Nobody wants to move a pin downstairs, upstairs is worse which will eventually happen for you lol. Halloween is a very unique pin. Definitely a different feel that matches the movie very well.
Not everyone’s cup of tea, but the family and I love it. Usually the last pin my daughter and I play when we have our competition against each other.
We can’t wait for SD. Grail theme for us. Have Loved Scooby for the past 48 years, well as far back as I can remember. Turning 52 on the 17th. #32
Quoted from SpookyBug:We did upgrade to metal geared servos! The servos we're using in Scooby are the same as the upper playfield on Halloween. Which to date I believe we've never had one fail.
Both servos I have had to replace in ACNC were metal geared type. Learning to keep one on hand as a spare.
Skippy2904
Any update on how many of these sold? Looks like CE are still available. I ordered a BS cause I thought the mystery machine art looked much cleaner and am #1821. I'm assuming these won't sell out so I'm curious how many are realistically ahead of me. What's the highest CE number reported so far?
Quoted from Indypin:but luckily my twin brother has that one already on order for his mancave). My brother was also super happy for ordering Godzilla, but that's a story for another thread. You won me over Spooky and I can't wait to put Scooby in my gameroom.
Hey! I'm a twin as well! (Identical)...But he doesn't have any pins!!!! Hey Pin-Twin! cheers!
Quoted from KING-HENRY:Hey! I'm a twin as well! (Identical)...But he doesn't have any pins!!!! Hey Pin-Twin! cheers!
We twins have to stick together! LOL
We both share this hobby like crazy. In fact, he's the one who got me interested in getting a pin so many years ago. Sometimes we would talk on the phone for what it seems like hours about pinball, mods, future releases and everything pinball related.
Ofcourse we get together and play pinball. We have to help each other out on mod installation because of our shaky hands and old man eye sight though
Quoted from Indypin:We twins have to stick together! LOL
We both share this hobby like crazy. In fact, he's the one who got me interested in getting a pin so many years ago. Sometimes we would talk on the phone for what it seems like hours about pinball, mods, future releases and everything pinball related.
Ofcourse we get together and play pinball. We have to help each other out on mod installation because of our shaky hands and old man eye sight though
Thankfully most twins can stick together with velcro..(But I could imagine the workflow of conjoined twins working on a machine-4 hands are better than 2!). I bet I could get him into pinball (in fact he kinda started this fire, in a way), but his passion/work is videography..so no money to get into this hobby, lol. That's so awemone you can share this passion with your twin; I know the 'mutual understanding/enthusiasm' of things in Life, as a twin..and if he were into pinball, I'd have to live in a van, down by the river; I'd have no money to live on!
Cheers! __and now, back to Scooby-Doo, Kids!___
Not many people know that Shawn Corey Carter took his stage name Jay-Z from the letters on the front of Wonder Twins Jayna and Zan's superhero costumes. It is unknown if he is also from their home planet of Exxor.
Quoted from JakePG:Scooby Doo got a shout out last night...
Hey guys I just did a walk around the shop and took a bunch of photos. We will be posting on our Facebook page soon.
Quoted from SpookyLuke:Hey guys I just did a walk around the shop and took a bunch of photos. We will be posting on our Facebook page soon.
Link?
Quoted from BallyKISS1978:He was a smart man. Nobody wants to move a pin downstairs, upstairs is worse which will eventually happen for you lol.
No kidding. WOZ and Hobbit - the 2 heaviest pins made - sent me on a quest for a used Esclalera. No way those go back up the stairs without a powered dolly.
977A74A2-110E-46C4-9FC3-CDEEBA157115 (resized).jpegComparing the under-playfield pic to the playfield pic I'm not sure why that tower is so big. I see the VUK for the brown wireform, but I think the boards are only mounted vertical because there wasn't a convenient place to put them flat. Not sure what that tallest part in the back is for either.
Quoted from dboeren:Comparing the under-playfield pic to the playfield pic I'm not sure why that tower is so big. I see the VUK for the brown wireform, but I think the boards are only mounted vertical because there wasn't a convenient place to put them flat. Not sure what that tallest part in the back is for either.
I've been trying to make sense of that section too, there are two sets of drop targets so both need a reset mech, then the mech to allow the ball to drop in and get vuk'd out. That tall piece has to be for the "scoop"/vuk and I'm guessing it has to be so tall / deep to accomodate the drops in front of it. That's my best guess but I'm very often wrong when trying to decipher these things from pictures.
Quoted from bobukcat:Here's the underside from the other end of the PF.
[quoted image]
Metal subway looks stout!
Quoted from bobukcat:I've been trying to make sense of that section too, there are two sets of drop targets so both need a reset mech unless it just resets both at the same time, then the mech to allow the ball to drop in and get vuk'd out. That tall piece has to be for the "scoop"/vuk and I'm guessing it has to be so tall / deep to accomodate the drops in front of it. That's my best guess but I'm very often wrong when trying to decipher these things from pictures.
OK, so those two "circuit boards" are probably the drop target resetters then. I didn't recognize them because none of my machines have drop targets
Quoted from TreyBo69:Just have like a 1% chance of a Scrappy Doo callout talking shit if you tilt.
That's actually kinda brilliant.
Quoted from PinballGalore:are all these decaled? buttered? both?
[quoted image]
No butter
Quoted from dboeren:OK, so those two "circuit boards" are probably the drop target resetters then. I didn't recognize them because none of my machines have drop targets
I don't really know how Spooky does their drop banks but the boards are probably really there to house switches or opto switches to detect which are up / down, the coil you see if front of each (correction from my earlier post as I can now see there is a seperate reset coil for the rear bank) board actually resets them.
I think I see #211 in that pic above. Always thought the side rails had to go on before the head hinge.
Quoted from PinballGalore:are all these decaled? buttered? both?
[quoted image]
I just noticed the stand alone bat on the topper. Nice attention to detail!
Quoted from insight75:I think I see #211 in that pic above. Always thought the side rails had to go on before the head hinge.
I was looking for 224 too but I think ours are in the other room
Quoted from Var1AbL3:I was looking for 224 too but I think ours are in the other room
#312 must be hiding on the roof...
Quoted from izzymonkey:That's actually kinda brilliant.
double danger tilt
"Puppy power! Let me at em!" while the ball drains
Quoted from TreyBo69:double danger tilt
"Puppy power! Let me at em!" while the ball drains
A bash toy where scrappy actually bursts into flames is the only acceptable inclusion of him in this pin
Quoted from SpookyLuke:Hey guys I just did a walk around the shop and took a bunch of photos. We will be posting on our Facebook page soon.
Excellent, now we need some pictures of the underside of the mini playfield!
L and R cabinet head sides
Quoted from Pinbolls:What are these? There isn't a backboard in Scooby Doo, Right? I thought they mentioned they went all the way to the back wall of the cabinet.
[quoted image]
There is no backboard in this game apparently
Quoted from transprtr4u:Backboard for in cabinet ?
Ah, that makes sense. I should have recognized that. Thanks.
Quoted from mpdpvdpin:L and R cabinet head sides
Quoted from SpookyLuke:Hey guys I just did a walk around the shop and took a bunch of photos. We will be posting on our Facebook page soon.
Awesome of you guys sending those pics!! Thank you!!
Now, let’s see that playfield in action!!
“And lcd screen”
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/spooky-scooby-doo-hype-thread/page/89 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.