#177 collectors edition from Spooky
You're currently viewing posts by Pinsider Cento.
Click here to go back to viewing the entire thread.
Any one else having issues with their lock bar on their halloween? I recd #177 on 12/23 and I having multiple issues with my Lockdown bar.
First, I can't get the lockdown bar to clear the Glass on the left side. It hits the glass. It appears my glass is cut unevenly-see photos. But even when I take the glass out of the machine the lockdown doesn't fit correctly.
Second issue, the lockdown bar is extremely tight but not on the sides like they normally do. The bar will not pull up and out. It rubs on the left side by where the latch grabs it(see photos) and it prevents the lockdown bar from lifting up and out. I tried adjusting the plate that receive the lock bar but there is not wiggle room there.
Third issue, is the latch on the Right Side hits the bottom of the playfield. Will not allow me to wiggle it at all. -see photos.
Extremely frustrated. I have 16 pins and never once have issues with a lock bar let alone all of these issues at once.
IMG_9435 (resized).JPGIMG_9436 (resized).JPGIMG_9399 (resized).JPGIMG_9441 (resized).JPGIMG_9414 (resized).JPGIMG_9444 (resized).JPGIMG_9445 (resized).JPG
Quoted from kciaccio:On the last pics you need to make sure the latches are up before fully dropping playfield or I usually just push up on the playfield and push latches past the playfield and let playfield drop down an inch again.
That doesn’t work. The only go to a 90 degree angle.
Here is a nice cover up decal set for the metal bridge that connects the upper playfield staircase to the left dump ramp. The floor decal is solid non transparent decal but the roof/shingles and shrubs/grass decals are printed on clear transparent vinyl so you can still see the ball. I think they add character to a few areas on the playfield that were kind of plain.
EB5935CF-5FC0-4F4E-AFFF-8F22AF80E605 (resized).jpeg50457489-1C75-4419-B7CB-80D8FDE6C4DC (resized).jpegBE5F0158-D64E-49B3-90F7-3EA7C0D9358D (resized).jpeg8E1B6015-F1C5-454D-AD4B-AD50730C34A0 (resized).jpeg8B930260-ED16-4D8F-9A6C-26B27197A613 (resized).jpeg
Quoted from delt31:Are you selling these? Looks pretty good.
You're currently viewing posts by Pinsider Cento.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/spooky-halloween-babysitters-welcome?tu=Cento and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.