Any one else having issues with their lock bar on their halloween? I recd #177 on 12/23 and I having multiple issues with my Lockdown bar.
First, I can't get the lockdown bar to clear the Glass on the left side. It hits the glass. It appears my glass is cut unevenly-see photos. But even when I take the glass out of the machine the lockdown doesn't fit correctly.
Second issue, the lockdown bar is extremely tight but not on the sides like they normally do. The bar will not pull up and out. It rubs on the left side by where the latch grabs it(see photos) and it prevents the lockdown bar from lifting up and out. I tried adjusting the plate that receive the lock bar but there is not wiggle room there.
Third issue, is the latch on the Right Side hits the bottom of the playfield. Will not allow me to wiggle it at all. -see photos.
Extremely frustrated. I have 16 pins and never once have issues with a lock bar let alone all of these issues at once.
IMG_9435 (resized).JPGIMG_9436 (resized).JPGIMG_9399 (resized).JPGIMG_9441 (resized).JPGIMG_9414 (resized).JPGIMG_9444 (resized).JPGIMG_9445 (resized).JPG