Adrian, MI
Quoted from Vimtoman:Getting closer to finishing.
Heres a clip test.
Looking forward to ordering. Great mod!
(Topic ID: 303630)
Linked Games
Halloween (Blood Sucker Edition)
Spooky Pinball, 2021-
Halloween (Collectors Edition)
Spooky Pinball, 2021
-
Halloween (Standard Edition)
Spooky Pinball, 2021
-
Ultraman (Blood Suckers Edition)
Spooky Pinball, 2021
-
Ultraman (Collectors Edition)
Spooky Pinball, 2021
-
Ultraman (Standard Edition)
Spooky Pinball, 2021
Topic Gallery
Quoted from Vimtoman:Getting closer to finishing.
Heres a clip test.
Amazing, cant wait too put this in my game.
1 week later
Ok really close to finishing the design.
Ive now cut to one display that covers Mikes room.
The other window is a pre lit with static image. This has three layers to give some feel of depth.
This is a costing and display availability choice.
20 Videos for the room.
Some just effects and fillers but a good range of events to give some life to the house.
Two characters played by Vimtoman 
, Dr L and Mike.
Yes your going to have my ugly mug on your pin....
You have two options for video control.
1. A set playlist so that you can see the whole list one after another. List is preset and loops.
2. Playlist chosen by the Red,Green,OFF lighting from the game. This is yet to be tested on the pin. Have used footage from youtube.
The color playlist function is experimental and a bit of fun to check out and give you a random feel.
Lighting levels are measured regular to take care of any ambient lighting changes.
I will have options to have random dimming of lighting for left window run it fulltime.
Brightness adjustable.
Cant see much need in changing the brightness but added anyway.
Just one power connector to 12v .
Fitting is still to be sorted.
Any advice on 12V power pickup points welcome. PCB ,PSU just PM me.
Will post when printing starts.
Quoted from MK6PIN:Great job as always!!!
A must have, of course....what a great toymaker...
Thanks 
I'm keeping tabs on your Alien mod.... Will push that pin up a notch
Thanks also for power connection info
Hamilton, ON
Quoted from McIntyre905:Do you know rough cost for this? Just wanna start saving my pennies ahah
Still ordering parts.
1 week later
OK Halloween dev is finished and I'm now making a batch up. Will contact people in a week or so.
I will add an additional mod to the Halloween house which is the Pumkin leaves shown below.
Price will be £185 which will include del and pumkin leaves mod.
Pumpkin leaves are flexible so will take impact from ball etc.
House fitted (resized).JPGPumkin leaves fitted (resized).JPGPumkin leaves model (resized).JPGPumkin leaves printed (resized).JPGhouse printed (resized).JPGQuoted from Vimtoman:OK Halloween dev is finished and I'm now making a batch up. Will contact people in a week or so.
I will add an additional mod to the Halloween house which is the Pumkin leaves shown below.
Price will be £185 which will include del and pumkin leaves mod.
Pumpkin leaves are flexible so will take impact from ball etc.[quoted image][quoted image][quoted image][quoted image][quoted image]
Bro!! Nice work! Just say when you want paid haha. I’m in.
I’m ready for all the Halloween mods. Please put me on the list for 2ea. I’m moving up my buddy game also
Magicchiz
Sydney
Quoted from Ch4p3l:Add me as well. Have your crate mod for Walking Dead and love it.
If you're making a list... and checking it twice... please add me to the list for this fantastic mod.
I think I've stated that I definitely would like this mod. But just in case, please add me to the list!
OK nearing the completetion of the first batch.
I'm ditching the color sensor section as it really does not bring anything to the mod due to the on off changes of the lighting.
You will still have ability to chose either Mike or Dr L videos only and a mixed selection of videos I have seletced from the two.
The video will seamlessly play one after another with moon and cloud reflection video in between.
The Pumking leaves have been cleaned up and ready to print up.
Quoted from Mad_Dog_Coin_Op:Can you post your list of potential buyers so we know where we are on it?
Your in the first batch
I dont like adding lists to the threads as they just keep on changing all the time.
Ive taken note of all that have commented on here and contacted me direct.
I should be able to cater for all but will be a small gap between for me to catch up.
Very nice, how many takes was it on the footage and do you have any outtakes to share
lol
Also like the effect on the left window.
Looks amazing!
Quoted from Lostcause:Very nice, how many takes was it on the footage and do you have any outtakes to sharelol
Also like the effect on the left window.
Looks amazing!
We had a few retakes making the ghost didnt want to trash a sheet so black marker on masking tape for the eyes.... Couldn't see what direction I was pointing so walked everywhere facing the wrong direction .
May post that later
Quoted from McIntyre905:Curious could you do a version with no video? Maybe just the way the left window looks for both?
Once the first batch is done I will have a model with no video.
Quoted from Vimtoman:Once the first batch is done I will have a model with no video.
Okay sounds good !
Please add me to your Ultraman list + Thanks!
...and what do you have in mind for Ultraman?
We're 140+ posts in and no word yet.
Quoted from SuperMica:Please add me to your Ultraman list + Thanks!
...and what do you have in mind for Ultraman?
We're 140+ posts in and no word yet.
I'm falling behing on it but work is being done. Theres testing of the theory of the model happening and things change daily.
Right now I'm focusing on the Halloween builds and when thats completed will be full steam ahead on the Ultraman mod.
Heres a sneek pic of what I have so far. Rough and will change more likely.
ultraman peek (resized).PNG
OK first batch is going out this week, Second batch next week. There will be a third but a delay due to stock shortages.
There will be a price increase after the third batch due to prices going up and the shortages of some components
So anyone after this message may have to expect a small rise.
Hope you enjoy the mods.
It's been fun to do and my parody of the Halloween house.
Quoted from Vimtoman:OK first batch is going out this week, Second batch next week. There will be a third but a delay due to stock shortages.
There will be a price increase after the third batch due to prices going up and the shortages of some components
So anyone after this message may have to expect a small rise.
Hope you enjoy the mods.
It's been fun to do and my parody of the Halloween house.
Can’t wait to get it! Then all I will need is the actual pin.
Promoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
