Halloween (Blood Sucker Edition)
Spooky Pinball, 2021
Halloween (Collectors Edition)
Spooky Pinball, 2021
Halloween (Standard Edition)
Spooky Pinball, 2021
Ultraman (Blood Suckers Edition)
Spooky Pinball, 2021
Ultraman (Collectors Edition)
Spooky Pinball, 2021
Ultraman (Standard Edition)
Spooky Pinball, 2021Quoted from Lostcause:Looking good, could it play film scenes in attract mode like those little tv mods?
I will be down for one anyway
No scenes from film I'm afraid to say due to rights etc
But theres going to be an animation with the main dude and some other titbits.
Will try and make it varied and entertaining.
Was thinking that, my TZ tv plays loads of scenes but guess someone has added them as that show is locked tight on copy rights.
Sure whatever you put in will be great anyway, my machines are rarely on unplayed so a trigger event is better for me. Less is more sometimes.
Have a great new year and happy hunting 
Quoted from Vimtoman:No scenes from film I'm afraid to say due to rights etc
But theres going to be an animation with the main dude and some other titbits.
Will try and make it varied and entertaining.
If there’s a way to leave it where we can add our own clips- that would be helpful
Quoted from kciaccio:How was looking on the mod? Can't wait to put this first mod on my Halloween!
Ive finished the body and all fits in location.
Also guttering added 
All parts and pcb fit in body.
Rear plate with connector done.
Just waiting for pcb to arrive.
Displays on order and should be in next week.
Sensors arrived.
So pcb tests to be done.
I have yet to finish off the video's which will take some time.
Have a bunch to link and sync. Mainly Mikey roaming around.
Plus work on syncing the sensor and pin.
Sensor may work or not. Yet to be determined if it makes a difference.Bit of a oddball idea i had.
frontage (resized).JPGQuoted from Vimtoman:Ive finished the body and all fits in location.
Also guttering added
All parts and pcb fit in body.
Rear plate with connector done.
Just waiting for pcb to arrive.
Displays on order and should be in next week.
Sensors arrived.
So pcb tests to be done.
I have yet to finish off the video's which will take some time.
Have a bunch to link and sync. Mainly Mikey roaming around.
Plus work on syncing the sensor and pin.
Sensor may work or not. Yet to be determined if it makes a difference.Bit of a oddball idea i had.[quoted image]
Awesome. Thanks for the update. Would be cool if it interacts when the ball passes through it.
Quoted from Vimtoman:Ive finished the body and all fits in location.
Also guttering added
All parts and pcb fit in body.
Rear plate with connector done.
Just waiting for pcb to arrive.
Displays on order and should be in next week.
Sensors arrived.
So pcb tests to be done.
I have yet to finish off the video's which will take some time.
Have a bunch to link and sync. Mainly Mikey roaming around.
Plus work on syncing the sensor and pin.
Sensor may work or not. Yet to be determined if it makes a difference.Bit of a oddball idea i had.[quoted image]
Dumb question for sure - don't blast me out of the water too hard! Where does this go in the game? I've tried to see where it would go on my HW and I'm still unsure... Thanks!
Quoted from HighProtein:My favorite feature of Ultraman...
Blow flipper/trough/auto plunge fuse 63 games in!
[quoted image][quoted image]
Quoted from zebpin61:Dumb question for sure - don't blast me out of the water too hard! Where does this go in the game? I've tried to see where it would go on my HW and I'm still unsure... Thanks!
Yeah, if there's a list going, please add me to it (Halloween).
Quoted from Gotfrogs:Just so everyone is on the same page. Is there really a list at this point or will be one be generated once the final design is offered?
Quoted from Vimtoman:It fits here.
[quoted image]
Where are we at timeline wise?
Update ....
Just have the video sections to do.
I'm going to try and make as many variations as possible .
Waithing for some kit toi arrive for this.
Almost there......
I don't have and will never have either game...just following because your mods are so nice! Great work..
Update.
Bits for video have arrived and shot some scenes which look pretty good.
Just need to complete the compositions of the videos to give a variety.
I think I'm going to use one screen for live and a fixed scene in the other window due to visual limitations.
Will post pictures of the final model when I'm happy with the paint job.
So really close to actual builds.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/spooky-halloween-amp-ultraman-mod/page/2?hl=capn12 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Evansville, IN
Sydney
Hamilton, ON
Essen
