Godzilla (Limited Edition)
Stern, 2021
Halloween (Blood Sucker Edition)
Spooky Pinball, 2021
Halloween (Collectors Edition)
Spooky Pinball, 2021
Halloween (Standard Edition)
Spooky Pinball, 2021
Rick and Morty (Blood Sucker Edition)
Spooky Pinball, 2020
Rick and Morty (Standard)
Spooky Pinball, 2020
Scooby Doo (Blood Suckers Edition)
Spooky Pinball, 2022
Scooby Doo (Collectors Edition)
Spooky Pinball, 2022You're currently viewing posts by Pinsider stefanmader.
Click here to go back to viewing the entire thread.
Quoted from Shapeshifter:If I say Beetlejuice 3x will it make it more likely?
Goonies - really not getting how this would make a good pinball.
Easiest pass ever.
I love the Goonies, but when it comes to Beetlejuice, i think the potential of possible toys on the playfield could be sooo good! Hope it is Beetlejuice. Beetlej... Whoops. Nearly done it.
Quoted from BallyKISS1978:They are nowhere near releasing a pin and took peoples money. And offer store credit in case they can’t make it.
oh. i understand. thank you
Quoted from benheck:There's a Spooky Deeproot connection, the story of which will remain buried inside a vault until Robert's Jpop Welfare Assistance company is dead and gone.
.... So.... Next month.
Ha ok looking forward to that story
Quoted from johnnyutah:[quoted image]
There was even a real life movie with Dolph Lundgreen as He Man. And Sceletor was awesone
Here a He Man Cabinet
And there is a visual pinball table
I have it on my virtual pinball, just alone because of the music, it is awesome. It brings you back into your childhood.
Quoted from joetechbob:Frank Langela was amazing as Skeletor!
Grew up loving He-man but boy does the cartoon not hold up. Still dig the Masters of the Universe movie though. Super fun.
Think gonna watch that movie now
I would love a Beetlejuice Pin. It could be cool to work towards a Beetlejuice Mode. First you need to try to scare them away yourself when you finally earn Beetlejuice, the fun really starts with the cool theme music and multiball etc. And then you need to work to get rid of Beetlejuice and he tries to sapotage your game.. Something like that could be awesome...
Quoted from benheck:Hey, if you want a Beetlejuice pin so badly, find a designer and company who gives a damn about the license.
Stern clearly didn't. Who's left?
Maybe a homebrew is the answer then.
watching army of darkness right now.
my god the beginning is epic. that indeed would make a good pin. cool music.
Quoted from Azmodeus:Let’s see this too someday.
[quoted image]
https://pinside.com/pinball/forum/topic/witness-mad-max-fury-road-homebrew/page/11#post-6261459
Oh yes Gremlins could be an awesome pinball, lots of screams and shout outs, kind of like TFTC.
Quoted from nogoodnames222:Pinball Circus 2 = confirmed
how awesome would that be
Quoted from djsolzs:Did Ben Heck say no to this one?
i don't know, but i remember him hating the idea of it.
Quoted from Beechwood:It is. But we need hope...
oh well placebo effect is gone now.
so the new pin is Halloween but with a second theme? Or does that mean two Halloween from different era, isn't that the same theme then.
when it is some sort of crossover that would be cool.
oh wait, so it will be 2 Pinballs with the same layout but different playfield graphics??? or is that just a guess?
I'm looking forward to see how the upper playfield integrate into gameplay. Is it a shot you will go often for or just a few times. And is it difficult to get to the top, or will you make the shot most of the time.. Hope gameplay videos are coming soon 
Quoted from benheck:Was thinking about "thin wood" couple days ago while helping Scott with Cuphead. His Baltic Birch from Woodcraft was 0.475" which is 12mm. Half inch would be 12.7mm
This is common for a lot of building materials - they list it in SAE/Imperial but it's actually Metric. Menards is honest, they'll sell you a 12" x 24" x 6mm piece of plywood. Says so right on the sticker. Hobby Lobby will lie and say 12" x 24" x 1/4".... but guess what? It's 6mm thick. (0.2362" IIRC)
is there a standard playfield thickness? a lot of parts are very specific and can not be altert for thickness right? like the nylon flipper bushings.
i measured my Williams bride of pinbot playfield at 12mm.
so i always thought this is the standard. do other manufacturers have it different?
Quoted from benheck:Hm so how does one solve not getting enough deep sleep? I can be awoken with mouse farts.
Install some mouse traps to get rid of the mice, that should solve it.
You're currently viewing posts by Pinsider stefanmader.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/spooky-2021-game-speculation-thread?tu=stefanmader and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Reichenau Im Mühlkreis
O'fallon, MO