Ok so I know this has been discussed several times but I am looking for clarification and I very new to working on my pins. Apparently there is a seven pin connector right by where the shaker goes. Ok I found it and it has a brown with blue wire and a red with white wire but has one blocked out pin. Do I unblock that pin to insert the connector into the seven pin spot on the provided pcb?

this connector supposed to go to the board that came with the cointaker shaker kit? It doesn’t seem to fit correctly.

I have tried to connect it to the pcb board with red wire up and down and neither way seem to work at all

Please help

03229030-6E3D-48F0-9914-6BB786FA512B (resized).jpeg

724337F5-B2DA-43C4-BD7A-896666E7357E (resized).jpeg

78F890AE-C37F-4087-8F09-AE3DE4042222 (resized).jpeg

AD5080F5-5542-420C-8B62-E87378497F9E (resized).jpeg

E77AE6EA-D489-413C-AEFA-765D0A5C354E (resized).jpeg