I have a Spider-Man 2007 that is stuck in a boot loop. Here is what happened:
Game was playing fine. Started multiball and all 3 flippers locked on. Turned the game off. Turned game back on now it is resetting when it tries to boot.

After the fact I realized the eos on the right flipper was broken off. Coils didnt melt or burn up, beeped fuses and none blew, and visually no transistors blew. All voltages checked out except 50v was 73v. Would this prevent boot? Any ideas where to start?

When it is trying to boot the flipper relay clicks on then clicks off.

Haven't worked on SAM games before so all ideas would be appreciated. Thanks for any help

Nudge

Display comes on shows a previous score and says game over. The the GI turns on, the relay on power board clicks, the leds next to the fuses F1-F4 light up. Then it reboots. The lights next to all the other fuses on power board stay lit but next to F1-F4 they turn off and come back on..

Just tried this. No change

Do the LEDs on the driver board indicate what might be wrong? L18 on power board lights up then turns off when it resets.

Any ideas for why the flipper coils would have "locked up" in the first place? It happened right when Doc Ock multiball was starting.

Could the flipper coils locking on damage the boards?