Quoted from zene10:
Ran into a problem and wondering if anyone could help. SMVE has a 64MB eprom. The colorization has pushed the binary file over this limit.
I noticed that MET Pro has a 128MB eprom.
1. Is it possible to put a copied version of the MET Pro eprom into SMVE to gain additional space?
2. Does anyone know of a source of pre-formatted Stern eproms that will work?
The eeprom is not used during normal operation : it's only used when dip switch 8 is on (to upgrade the game).
So, replacing the eeprom will not change your issue.
The firmware (including the dmd frames) is stored into the flash memories that you can see in the upper left corner of your photos.
On your game, you can see that one of them is not installed (under the serial tag).
Unfortunately, it is not possible to install the missing component without recompiling the firmware (only Stern can do this).