Spider-Man
Stern, 2007You're currently viewing posts by Pinsider debaser.
Click here to go back to viewing the entire thread.
I'm having issues with the Doc Ock VUK kick out not always send the ball up the ball guide to the wireform ramp. Sometimes it miss the ball guide and hit the side of the cabinet. It works fine about 2 out of 5 times.
I'm assuming the issue is wear on the nylon part of the plunger and the ball is not sitting on it evenly when it kicks it up. I've got one of these ordered but figured I would see if anyone else has had this problem before and if a new nylon plunger fixed it. Thanks!
Quoted from bobukcat:Never really looked at it that closely before but I'd make sure the mech hasn't come loose from the bottom of the playfield, the coil / stop aren't loose from the bracket and now misaligned or that the coil sleeve isn't broken / worn out.
Already did all that. I ended up fixing the problem by taking out the ball stop bracket for Doc Ock and bending it forward a bit. That fixed the issue and also greatly reduced the number of bounce outs from Doc Ock.
You're currently viewing posts by Pinsider debaser.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/spider-man-doc-ock-ball-guide-kickout-issue?tu=debaser and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Rancho Cucamonga, CA