Sorry for the delay.. cancer free. Looks like I got a god wink to live a full life ahead though now I have 15 inches of Titanium in my right leg. Really retired now and life is pretty good overall.

I ended up because of size issues not using the Dayton audio driver for the Goldeneye game. I am using a Oaktron 100-MR08-02 fits prefect as a replacement for the OEM driver. Though the rolloff in response above 8500 Hz does really a much better job. I swapped out the woofer and used the same from above for my other two games (IJ and WCS). If you do a search on the above driver all the specifications are on Misco (Based in Minnesota) they are a very good US based company that has good specifications (Major supplier to a number of commercial companies, not sure about pinball companies).

Next up is to do this with my new game Iron Man pro-vault edition to improve the sound output as well.

I should note that I did have to adjust gains on the different drivers through the firmware to boost the woofer output.

Also I did not "add" any electronics except the passive crossover to my mods. In home environment play the output is quite sufficient.

Goldeneye speaker and display panel (resized).jpg

Goldeneye upper driver (resized).jpg

Goldeneye upper speaker mounting (resized).jpg