Anyone have a good translite avalible to sell? Also looking for the opto cam for the rotating ball guide, thanks
You're currently viewing posts by Pinsider drickey86.
Click here to go back to viewing the entire thread.
Anyone have a good translite avalible to sell? Also looking for the opto cam for the rotating ball guide, thanks
That looks awesome id deffinatly buy one , my machine has a black upper pf (prototype machine from what i gather that would look way better and match my new blue ramp!
Just about finished with my restoration aside form one part. I need to find the space station diverter opto cam that drives the ball diverter mine is completely missing. (Black part pictured on top of opto board) hope someone has one or knows where i can get one .
Quoted from ajfclark:I have a related question. I find sometimes my machine doesn't pay the Stop and Go award. It also seems to turn the Space Station more than is needed. eg. I hit the left VUK, it kicks the ball, then turns the station, then realised it's lined the right ramp up to the now occupied dock and turns the station again.
I assume these two things mean that the optos either aren;t always lined up right, or the interrupter is possibly borked?
Clean your optos with some rubbing alcohol on a q tip
Quoted from ajfclark:I know a guy in Europe that's got one. PM me if you want details.
Speaking of kickbacks, the manual says 24-900, but it always seems to be a 23-800 which would be slightly stronger. Thoughts?
Stronger is most always better in my book
Quoted from ajfclark:Candidate for a 3d printed copy?
I would say it could be done if someone had one to copy i dont have one at all or any means of 3d printing
Quoted from bpull:I actually started working on this piece awhile back. I'll look for it and finish it, then 3D print it and see how it comes out.
Brian
That would be awesome when one becomes avalible i will deffinatly buy!
Quoted from bpull:And it's printing. I'll need you as a tester so I'll send it with your space station plastic.
Awesome!! Sounds great
Tyring to sort out some hack jobs on witing and fix the the right way could someone post a pic of connector j1 and connector j8 on the power supply board i want to be sure i have all wires in the correct places thanks also is there any reason i couldnt use a bally style conncetor and pins on j8 as i do not have the correct .156 idc in my parts stock but do have .156 trifuricon
Quoted from ajfclark:Does the power wiring diagram at the back of the manual have the required information?
I have a printed out version and its not the best and too small to see
Quoted from Brijam:Search the forum and you'll find a thread on mail forwarding. I just used the mail forwarder everyone talked about and it worked out great.
Thanks but ended up working out a deal with a fellow pinsider in uk to for me and ship to me
Anyone interested in a complete Translite glass trim all assembled .its not perfect has a couple spots but is better than alot i have seen glass and trim are brand new. Thanks to DangerDan i have a mint nos one in mine now so dont need this one. Pm if interested will include a pic of it in the machiene
70D82D2A-523B-4FE2-A103-FF7B31368BDF (resized).jpeg
31B1B1A7-FA04-4B30-99B0-55648C835FD5 (resized).jpeg
1CBCE048-7DEE-4AD7-AD80-089231B751EA (resized).jpeg
Have an extra set of new pf plastics that look great -the single pop bumper piece if anyone is in need of them
Added over 6 years ago: Have an extra set of new playfield plastics that look great . Missing the single pop bumper piece ( needed it for my machine ) . If anyone needs them. Would prefer to sell as a set
Quoted from Kallek:Does anyone know how many GI-lights there is on PF - White and green?
Also any suggestions on what kind of LED for the green GI - i would like it to pop a little more than now - it hardly visible during multiball.
If memory serves me correctly I believe it was in the ballpark of 25 each give or take. I used comet 4 smd in all mine and it really pops looks great & it is bright for sure. All a matter of taste really , if you want something a little less intense the comet frosted are a 2smd bulb with a frosted cap I have them in my BK2K and they are slightly less intense but still look good.
Quoted from Platypus:I had to replace my ramp drop target. does anybody know where to get the decal?
[quoted image]
I got mine from Jeff @ classic arcades
You're currently viewing posts by Pinsider drickey86.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/space-station-club-members-only?tu=drickey86 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.