Just picked one up for a cool grand. Right down the street too. Time to get cleaning!
You're currently viewing posts by Pinsider Ronnie1114.
Click here to go back to viewing the entire thread.
Quoted from MustangPaul:good price, hope it's in good shape.
Hope so too, first game that has shown up where I live in ages.
Another quick question, is the right hand lock supposed to have a one way gate to prevent balls from going into it without going through the space station?
How does one adjust the space station. It does not always pick the right path for the ba to go down. Often it picks one where there is already a ball locked.
Quoted from fabsj82:Thanks ajfclark! I had power all lugs. I just ran down and grounded it to the side rail and she popped. I will work at tracing that wire back tomorrow. Thanks everyone for all you quick responses I look forward to being in this club for a long time to come!
This usually means that the transistor is bad. Replace q73 with a new tip 102 and I think you will be in business
Quoted from reconsider59:Hey all,
So I’ve got a new motor, and the new one doesn’t have the little pin that you see thru the post, as you see in this photo.
So, can that pin be removed from this old motor? Can I then use that pin on the new motor? Or do I need to fully remove the plate below the playfield, to then get this old motor off, and I then need to find a little pin that will go in my new motor, so it holds the plastic foot properly?
Thanks!
[quoted image]
If you don't want to use the old one you can usually find new roll pins at a hardware store
Quoted from reconsider59:Is it just super-tight in there? The pin, I mean? There don’t seem to be threads to screw it out...
Yes, you need a punch to get it out, can be somewhat of a hassle. No threads
You're currently viewing posts by Pinsider Ronnie1114.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/space-station-club-members-only?tu=Ronnie1114 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.