First thing, check the fuses on the power board. Pull them and check with meter.
If ok, check the voltages at all the test points with a meter.
You can get the voltages from either Pinwiki or Clays Guides (if you have a copy)
rd
You're currently viewing posts by Pinsider rotordave.
Click here to go back to viewing the entire thread.
First thing, check the fuses on the power board. Pull them and check with meter.
If ok, check the voltages at all the test points with a meter.
You can get the voltages from either Pinwiki or Clays Guides (if you have a copy)
rd
Quoted from wierdeer:Thanks for the advise!
I looked at pinwiki and can't find a power board.
Rectifier board maybe?
Yep.
Check the molex connectors there too. Really prone to failure.
rd
You're currently viewing posts by Pinsider rotordave.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/space-invaders-2?tu=rotordave and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.