I'm going to check out a sound stage next week. The owner says the flippers aren't working due to a blown fuse which has happened once before a few years ago. I couldn't find anything in the manual on the type of fuses. Can anyone tell me the type and value fuse that I'd need to bring with me to be able to plug into the game and get the flippers going (and see if it blows again)?
I think there are two fuses in the flipper circuit for this machine. One leading from the transformer is a 15 amp fuse and the other leading from the bridge rectifier is a 10 amp fuse. There are many other coils that share parts of the circuit with the flipper coils. If all these other coils work properly, then most likely there is an issue with one of the flipper coils.
Quoted from Chalkey:I'm going to check out a sound stage next week.
It sounds like it's not much of a problem. If in decent shape and a good
price, I'd pick it up. If needed, you'll be able to get help here..
Sound Stage is a pretty good game..
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/sound-stage-fuse-values and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Chesterfield, VA