The process for making the plastics was nicely explained. Now that they are in CAD, if you have an interest, PBL can take those as DXF files and laser them out of plastic. I hear they are reasonable. It would allow your art (printed or drawn on tracing paper) to be spray glued to the underside of the plastic - if you want to go that direction.

Great attract light show. Are you using the playfield as a monitor feature of MPF? You inspire me to do some coding this week.

Does spooky manufacture with Fast? Not that switching over to multimorphic would be difficult. MPF wouldn't care either way.

Interesting. I had not seen a playfield digitized in that way. Do you see artificially smaller measurements at the edges or do they run an algorithm to correct for perspective distortion?

Thanks again for the detailed write up on the clearcoat process. What type of respirator did you use to keep from getting poisoned in the spray tent?

Are you going to be in the home brew section? (Asks the guy who is hoping to play while keeping an eye on his own.)

I noticed when you were packing up spin ball you padded between the playfield and the glass. I am curious why. I am packing up my home brew tomorrow.