Boothwyn, PA
Try cleaning and or adjusting the coin relays on the motor board.
(Topic ID: 299194)
Linked Games
Mars Trek
Segasa-Sonic, 1977
Topic Gallery
You're currently viewing posts by Pinsider bonzo71.
Click here to go back to viewing the entire thread.
Quoted from Bonk:Ha I didn't notice there was a 3rd coin relay on the other side of the board. Went through and did the same thing to that one, this one does not add credits to the reel but does cause the score motor to spin around once.
Does your coin door coil pull in when you power on the machine? I've noticed mine does not do that and when adding credits I see the coil do a very weak pulse which is not enough to activate the lockout. Wondering if I have a bad coil there that's causing some of the issues. Thanks again for your suggestions, very much appreciated.
Yes, the relays on the door lock on when the game is first powered on and temporarily power off when adding a credit.
1 week later
Behind the spider are two screws. Loosening those will allow you to rotate the contact board. You will need to remove the spider, by removing the nut, to get to the screws.
As it is, it will cause issues. The contacts on the spider should be centered on the rivets.
2 weeks later
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider bonzo71.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
