DMD comes on fine.
I have Power at all the boards.
I also have power at each solenoid but none of them will fire (coin door is closed). Same story for flashers.

Also, I have no GI LED working.

What I’ve done:

Reseated all connectors on the boards including ribbons and molex.
Checked fuses.

What should I try next?
90E95675-F5DD-4917-AEC1-2EFF99752E96 (resized).jpeg

#2 2 years ago

JBC

Johncare07

Pinside member

Jacksonville, FL

6y 55,800 241 11 21

OP
Quoted from Johncare07:
I’m stumped. Any help is appreciated
CV playfield swap. Everything in the game was working fine before Got it all back together.
DMD comes on fine.
I have Power at all the boards.
I also have power at each solenoid but none of them will fire (coin door is closed). Same story for flashers.
Also, I have no GI LED working.
What I’ve done:
Reseated all connectors on the boards including ribbons and molex.
Checked fuses.
What should I try next?
[quoted image]

solved. It was the ground strap in the backbox. It wasn’t grounded. Once I tightened the nut over the screw everything worked.

You're currently viewing posts by Pinsider Johncare07.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

This page was printed from https://pinside.com/pinball/forum/topic/solenoids-gi-and-flashers-not-working-?tu=Johncare07 and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.