I have one. Love it!

Never leaving.

If you ever want to sell that, let me know.

Great looking game.

I do have a very nice example. I have had it a long time, it's the game everyone plays.

I have one concern and it is the keylines around inserts are starting to degrade. Over the last 8-10 years, even though i wax regularly, i begin to see them deteriorate...

I am thinking seriously about sending it to HEP. but i would send it with the caveat that Chris set it up and play it for a month before he tears it apart. I would be concerned that it come back and not play the same way...

Also my PF has a couple of blemishes in the halftone areas and i am not sure if i would just leave them as they are as opposed to changing the halftoning to an airbrush fade.

Are your PF's clear-coated? If not, are you concerned about Vids theory that the Ink on NOS PF becomes brittle and requires Clear-coating to survive?

Bob

On the system 7 drops, I usually make sure the spring flaps are nice and smooth. If not I buff them with the dremel and small buff. Lay flat on table.

I also make sure the tapped strap on the back( that the spring flaps ride on) is also buffed and has no burrs. Sometimes you need to flip it over.

Maybe a DB3 microswitch with a roller actuator would work? Or the honeywell?
pasted_image (resized).pngpasted_image2 (resized).png

https://www.zoro.com/honeywell-premium-mini-swch-3a-spdt-lng-rollr-levr-v7-2b17d8-207/i/G4584535/

yeah, those didn't turn out so good from the phone. let me give it another go.

They should trigger independently lower first then upper.

Not that i can do that during game play.....

be well,
Bob

I had my NOS playfields scanned. Here is a link to the scans:

https://bd5adc1e-6a65-46f3-9d76-231f2bd67255.mailbutler.link/p2/4d550911-582b-4e75-a84c-ade493932e7f/9437fd1b-cf87-44a9-8729-df6ae2e54fce

You may have to Cut/paste into browser.

If the drain shield is lit for that outlane it will give the ball back of you drain there. If you have 1 lit it alternates sides with every sling hit.