Played a game on my Sorcerer tonight and realized that most of the controlled lights were out.
Game has been solid with no issues until now. Most bulbs were changed to LEDs quite a while ago.
The only controlled lights working seemed to be column 2. Seems like pretty much everything else was out.
Opened the backbox and could smell toasted electronics.
Resistor R103 was visibly toast. Didn't see any other damage.
Is that likely the only problem, or should I be looking for more?
That resistor shows in the manual as 27 ohm, 2 watt. Ideas on where to source that?

Thanks!

Thanks.
Yeah, all 8 of those resistors look original, and clean. Except one that fried.
None of those chips are socketed. I don't see any signs of previous work on those either.
I would probably replace resistors myself, but I'll send the board out if the chips need to be replaced.

(Dirty Harry voice) A man's gotta know his limitations.

Board is on it's way back to me. Should be back up and running this weekend.
Thanks Mr. Hibler!