Monster Bash
Williams, 1998My Frankenstein stopped working and I found the longer shaft on the motor that spins the four gears broke.
This is the shaft that's broke.
I found what appeared to the be the right part on Planetary Pinball, ordered, received and appears to be wrong.
I did the same thing at Ministry of Pinball and Australia spare parts and they all come the same but appear to be wrong.
imagejpeg_0 (resized).jpg
Part number?
This could explain the big holdup on the remake. If and when it comes, your part should then be available.
Quoted from o-din:Part number?
This could explain the big holdup on the remake. If and when it comes, your part should then be available.
Sorry about that. I should have put that in the first post.
Part #02-5443 Monster Mech. Assembly Drive Shaft
Quoted from jtaudio:Shaft from MM is the correct one for MB that is incorrectly listed in the manual. This is it:
http://www.marcospecialties.com/pinball-parts/04-10988.1
That appears visually to be wrong also or am I looking at it wrong?
The broken shaft is round on one end and square on the other
That one looks to be square one both ends also like the others I've bought.
I'll order it and give it a try.
Thanks.
Quoted from DK:Join the Cirqus is a great guy. He loves Aliens
Menacefire is a great Guy!
He Loves Centaur!
Hey Elevatorman
Contact PPS and explain that whoever machined 02-5443 for them did so incorrectly and get a refund or the correct part. There were many of these incorrectly machined 02-5443 parts floating around years ago and even though everyone was informed, may still have some lingering around.
The photo of 02-5443 on the MOP website shows a correctly machined part. So if that is in fact what they have in stock, it is the right one.
http://www.ministryofpinball.com/en/game-specific-items/williams/monster-bash/cactus-canyon-monster-bash-shaft.html
It looks like Marco and PSPA are O/S.
Wally
Contacted PPS and the picture on the website is right but the part is wrong.
They are looking into it.
Marco says they have not been able to get that part since 2014.
Looks like I'll try to get a machinist to make a batch of them for others that may need them also.
Unless anyone else knows a place to get one.
Thanks.
Quoted from Ballypinball:As I said I have a ton of them and cheap
I'd like to buy 2 or 3 from you please.
I missed that and in your post.
Quoted from Elevatorman:I'd like to buy 2 or 3 from you please.
I missed that and in your post.
I will put them up on a shopping cart tomorrow and post the link
Quoted from LTG:CGC doesn't sell parts.
LTG : )
If only rick would, every MM part should be available to buy
Quoted from lordloss:If only rick would, every MM part should be available to buy
I should have every part
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/so-is-this-monster-bash-frankenstein-motor-shaft-impossible-to-find and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
St. Louis, MO
Melbourne
Calgary, AB
