SMVE won't boot. Please help!!

(Topic ID: 214869)

SMVE won't boot. Please help!!


By Toasterdog

4 months ago



Topic Stats

  • 15 posts
  • 6 Pinsiders participating
  • Latest reply 4 months ago by snakesnsparklers
  • Topic is favorited by 1 Pinsider

You

Linked Games

No games have been linked to this topic.

    Topic Gallery

    One image has been uploaded to this topic. (View topic image gallery).

    httpwww.sternpinball (resized).png

    #1 4 months ago

    OMG worse time ever. I have a buyer driving 5 hours to pick up my SMVE and they are in route. After switching out the ColorDMD for the original the game will not boot.

    I have tried without the display plugged in, but think my connections were correct. I have changed quite a few out.

    Nothing looks physically damaged. The game played perfectly and now it doesn't boot at all.

    Any suggestions????

    The game powers on and GI lights up only.

    #2 4 months ago

    I would try hooking the old one back up and seeing if it works.

    #3 4 months ago

    Have you checked fuses?

    #4 4 months ago

    I've tried both. Old display, no display. Same lights, but nothing else.

    Fuses all look fine and all the same diagnostic LEDs are on as my working TWD Pro. Same lights stay on for a few and then go away on both boards (18, 20, and 50v) after powring down.

    #5 4 months ago

    I can check continuity of the fuses (I know they dont always look smoked) but which ones would prevent game from booting? Any ideas

    #6 4 months ago

    Deff pull them out and check them. I am not sure about which one should be in the manual if you have it. I would check IPDB and see.

    #7 4 months ago

    Ya, can’t do visual on fuses, I’ve been burned a few times doing that. Grab the dmm and continuity test em. As heni said, check the manual to see what fuse does what, or test them all if you have time.

    #9 4 months ago

    There are LEDs next to the Fuses, which ones are not lit when the game is on and the coin door closed?
    httpwww.sternpinball (resized).png

    #10 4 months ago

    Is there a ribbon cable on your DMD? If so is it correct?

    #11 4 months ago

    It is often a simple solution and I hope so for you too. Swapping out a DMD is a simple process that doesn't leave much to mess up. Loose connector that was inadvertently bumped?

    #12 4 months ago
    Quoted from PinballManiac40:

    There are LEDs next to the Fuses, which ones are not lit when the game is on and the coin door closed?

    I'm an idiot and thought I saw all LEDs on. F11 was blown. Sorry for my stupidity, lol

    But Thanks!!

    #13 4 months ago
    Quoted from Toasterdog:

    I'm an idiot and thought I saw all LEDs on. F11 was blown. Sorry for my stupidity, lol
    But Thanks!!

    Last minute selling panic. We've all been there. GLWS.

    #14 4 months ago

    Believe me I was panicking for 3 hours, knowing the seller is coming each way 5 hours. I totally spaced out and missed the one light out. So dumb, but oh well. Live and learn. Thanks to all for getting me through it.

    I reversed the DMD power cable and ribbon cable originally and blew that fuse.

    #15 4 months ago

    Glad to hear you got it working! Good luck on a smooth sale.

    Promoted items from the Pinside Marketplace
    $ 76.95
    Cabinet - Shooter Rods
    Super Skill Shot Shop
    $ 40.99
    Lighting - Interactive
    Lee's Parts
    $ 24.95
    Playfield - Decals
    Hookedonpinball.com
    $ 20.00
    Playfield - Decals
    DevilsMuse Arcade
    $ 48.00
    Cabinet - Other
    ModFather Pinball Mods
    From: $ 42.00
    Cabinet - Shooter Rods
    ModFather Pinball Mods
    $ 23.00
    Electronics
    Yorktown Parts and Equip
    $ 159.99
    Lighting - Other
    Lighted Pinball Mods
    $ 199.99
    $ 129.00
    Cabinet - Other
    PinGraffix Pinside Shop
    $ 48.00
    Cabinet - Other
    ModFather Pinball Mods
    $ 29.99
    Cabinet - Sound/Speakers
    Lighted Pinball Mods
    $ 76.95
    Cabinet - Shooter Rods
    Super Skill Shot Shop
    $ 60.00
    Playfield - Toys/Add-ons
    Docquest Pinball Mods
    $ 99.00
    Cabinet - Toppers
    Docquest Pinball Mods
    From: $ 7.60
    Cabinet Parts
    PinBoltCaps
    From: $ 42.00
    Cabinet - Shooter Rods
    ModFather Pinball Mods
    $ 139.99
    Playfield - Toys/Add-ons
    Medisinyl Mods
    From: $ 42.00
    Cabinet - Shooter Rods
    ModFather Pinball Mods
    $ 22.00
    Playfield - Toys/Add-ons
    ModFather Pinball Mods
    $ 175.00
    Lighting - Interactive
    Professor Pinball
    From: $ 6,499.00
    Pinball Machine
    Flip N Out Pinball

    Hey there! Got a moment?

    Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside