Hi folks,
i have a problem with my smart dmd and dmd extender.
I installed smart dmd + license an a 4gb SD card.
In pinball Browser i used the Marco (mtl 1.63) to create the colored rom (MTL1.7). After that i modified my smart dmd.txt to sidechannel serial instead of inframe coloring.
I copied the smartdmd.txt to the smartdmd folder on SD card.
Now the metallica wont Boot correct.
The smart dmd shows no signal and i don't now whats wrong.
Hope someone can show and guide how both parts run together. Maybe i made wrong settings in pbl Browser.
Here is the picture of my smartdmd settings in PBl-Brwoser
Maybe some can help me !
Thank you very much and Best regards
Sven