Doctor Who
Bally, 1992Hi all
First time poster and pretty new at restoring machines
I have a Bally Doctor Who machine that I'm fixing up. I've got it mostly working and have even added the motorized topper. There should be a 4 lamp pcb on top of the backbox to illuminate the head. The bally part number is A-15742. I've yet to find one in any of the more popular online sites.
Any advice on where to look for one or a site that could build one would be greatly appreciated.
Thanks,
Mike
Well, it doesn't look like he carries that specific board but keep this one in your favorites for similar hard to find pcb's.
If you don't end up making your own somehow, send me a PM. I can put you in touch with a guy that can make any board you need...and they'll look like they were factory made. I've had to have a couple impossible-to-find boards made for some of my really rare foreign machines...so anything is possible (assuming you have schematics).
Thanks for the replies. I found a breakdown of the all the parts that go into making the board.
A-15742(1) 4 lamp g.i. pcb assy
24-8768(4) bulb #555 6.3Volts .25Amps
24-8805(4) socket-pcb H wedge
5768-13266-00(1) PCB-4 lamp g.i.
5791-10869-03(1) 3h r/a sq pin .156
A-15742-1(1) 4 lamp g.i. pcb assy-w/spacers
03-8022-4(3) "spacer .250 L"""
A-15742(1) 4 lamp g.i. pcb assy
Is this the kind of info that someone would need to make one?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/small-hard-to-find-pcb-replacement-boards and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Fair Oaks, CA