Boo button is the same button used to throw out a runner who’s stealing a base.
You're currently viewing posts by Pinsider shirkle.
Click here to go back to viewing the entire thread.
Quoted from Johnbeatle:Just purchased this game. Played fine at sellers location, no surprises during move but now it appears to have some issues on the control panel. After setting up the game after the move, we did notice that two of the wires on the larger connector were loose. I reconnected those as best I could and seemed to be ok for a few games. Now when I start up the game, no errors, and sometimes it will let me start a game throw a pitch and hit it. Then on the next pitch the button won't let me throw a pitch. Anyone seen similar issue? Is it documented anywhere how the wires from the control panel should be connected to the connecting plugs?
Here is the switch matrix with wire colors.
798E11EC-241D-4BC7-8013-F64C3A28736D (resized).jpegCould somebody please take a picture of connector J120 and J119 (if it exists)on the power driver board for me?
The lights on my coin door don’t work and the schematic shows they go back to J119, but I have no connector there. The same colored wires (violet and white violet)are going to J120. I can’t tell if that’s correct or not since doesn’t match the schematic.
Thanks PinballManiac40 somehow I never saw that page…maybe because it’s at the very end of the manual.
Swapped those connectors. Still no coin door lights, so that’s a mystery to me. Do you guys have coin door lights?
You're currently viewing posts by Pinsider shirkle.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/slugfest-club-back-back-back-back%e2%80%a6-gone?tu=shirkle and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.