Chelmsford, MA
Anyone know who sells the entire set of push buttons? I saw MAD has a listing...but is out of stock since I started looking over a month ago.
Any other companies/places sell the complete set?
(Topic ID: 217006)
Linked Games
SlugFest
Williams, 1991
Topic Gallery
You're currently viewing posts by Pinsider johnnyarcade.
Click here to go back to viewing the entire thread.
1 month later
For anyone that has purchased new push buttons, do the Fonts match?
I bought all 10 buttons new from Marco, but the 4 pitch buttons have 3 different font/sizes ... looks bad IMHO.
Is this as good as it gets for repo push buttons...? Has anyone else procured ones that look like the original font (or at least match between pitch buttons)?
I have to call Marco as the "Bat" button had no text on it at all ...and I'll ask if they can match the pitch button font size/type from more they have in stock. Just curious if this is what everyone else is seeing when buying reproduction buttons.
1 month later
Quoted from JohnnyArcade:For anyone that has purchased new push buttons, do the Fonts match?
I bought all 10 buttons new from Marco, but the 4 pitch buttons have 3 different font/sizes ... looks bad IMHO.
Is this as good as it gets for repo push buttons...? Has anyone else procured ones that look like the original font (or at least match between pitch buttons)?
I have to call Marco as the "Bat" button had no text on it at all ...and I'll ask if they can match the pitch button font size/type from more they have in stock. Just curious if this is what everyone else is seeing when buying reproduction buttons.
Just to update anyone who may be looking to order replacement buttons. As mentioned above, the font from Marco was off. They were committed to fix it, but their graphic designer was off work for an unknown time (first just a week then two or more weeks). I opted to return the buttons (they gave me a full refund no problem) and purchased the pitch buttons from MAD via eBay. MAD's button font appear far closer to the original and are all very similar in font size/type.
MAD on left, Marco on right.
buttons (resized).JPG 3 months later
Quoted from ericthehalfb:Need some help.... Having some issues with my Slugfest. During game play only, Pitching game buttons on the panel are working sporadically. Works fine in test. When trying to pitch the ball using same button repeatedly, button stops working. Also, game appears to be in delay mode. Takes long time for ball to recycle after pitch is completed. I swapped out the CPU board and ROM and still same issues. Connectors and switches are good and appear to have no issue in test. I am baffled and could use some help and advise. Appreciate any and all feedback.
How many balls in your game? If a ball is not ready (in position) it won’t pitch.
5 months later
My Bleacher plastic has several chunks out of it.
I found Phoenix Arcade sells a replacement $80 shipped. Anyone know of other sellers? (MAD has none in stock)
Also, any ideas how to protect this plastic from cracking/breaking from low home run balls? If I replace, I’d prefer to protect it somehow...looks prone to getting broken again.
2 months later
Just installed NVRAM on my pin and noticed the ROM chip says "REV LA1".
I see L1 is the current version. Anyone know the difference or if they are the same?
2 weeks later
Just bought new bleacher plastic. Any tips to keep it from breaking as bad as original? Any sort of protectors available?
3 months later
Bat started sticking after swing. So took apart to fix/replace. Mine looks like it has had hacks.
Does not have 02-2750 roller drive arm (part that is more like a spacer/shoulder).
So need this. But...
My A-6338 driven arm assembly (bat bolt assembly) has a washer and screw on the bottom. Is this hacked or they used to be like this?
Looks like it sticks up further than the new version. May have added to catching after swing.
Anyone know if this bat assembly is normal?
5FDD4934-BB15-44A0-9D73-2849989D223C (resized).jpeg 2 months later
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider johnnyarcade.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
