A few things:
1) If you've been trying to get the ball over the fence with no luck and haven't changed your bat linkage with the oblong slot, do it. I went through all the washer, tape on the spindle, jacking the back of the game up, with little success. Replaced the linkage, bang, she's out of here.
2) A few months ago I was looking for help on the last group of lights I just couldn't seem to get to come on, those behind the facade and the 2 shining down on the baseball cards. Did this that and the other thing everyone recommended on here & facebook, to no available. Finally came back yesterday for another go. Voltage to all sockets, so I decided to hook up a test socket. It lit with one side clipped to the incoming line and the other to the ground in the head. None of the 12 lit. Turns out everyone of those 12 need the sockets fiddled with, even though I'd put LEDs in months ago. Still have the jumper to the ground, otherwise they don't work, though they do seem to be functioning properly this way. Shutting off during the anthem and coming back after. Am I looking for a smoke show if I leave things this way?
3) How much T-Molding do I need to order to redo this machine?