I’m considering become a member of the Slugfest club. Are the dimensions of the uncrated machine from the promotional flyer, correct? Checking to see if the space I’m working with for home use will be ok for the machine. Thanks! When it comes to fun, this might be my holy grail game.

Going to be joining the club real soon. Finishing touches on a shopped Slugfest are being done and will be delivered to me soon. Mine will have some blade art, which looks really nice. From what I was told, this was from Williams. Apparently they made limited quantities.

Edit: Blades not from Williams.

Thanks for the info!

Holder for pricing card. Here’s what it looks like. Speaking of which, does anyone do custom cards for Slugfest?

E7613CAC-73FF-4D97-81F4-C209103EAAAF (resized).jpeg

It's a possibility, but that can vary on the game settings and whether the card dispenser is set to shoot out cards. Might just do a Slugfest logo since instructions are on the red strip and game credits are behind the backstop fence. It's smaller than an apron card, so you can't have a lot of information there.

That actually looks pretty nice. Do you have any extras I can buy from you?

She's a BEAUT, Clark!

Got my Slugfest over the weekend, but have troubles with hitting home runs. Ball always keeps hitting the bleacher art below the home run deck. I think my game is around a 5 degree incline, does it need the full 7 degrees? Bat makes a solid “twack” sound, so I think the bat mechanics are good.

Thanks!
Ryan

Thanks guys for the help, will take a look at that. Played a few more games with no adjustments to see if it was user error (lack of skill) and was able to hit a few home runs, but majority of balls in flight were hitting the bleacher art or hitting the netting above the home run deck and bouncing back off the playfield glass. Really odd. The game was shopped too when I bought it, so wasn't expecting to have to tinker too much.

Was going to do some work on my Slugfest to add a card dispenser, swap out the baseball cards on display, and change the stock DMD to a ColorDMD. I have a plate over the dispenser opening...what kind of screwdriver bit do I need to remove the security screws to get access?