(Topic ID: 245125)

Skateball - playfield solenoids out/ playfield fuse ok

By Blenderhead

4 years ago



Topic Stats

You

Linked Games

You're currently viewing posts by Pinsider BallyPinWiz.
Click here to go back to viewing the entire thread.

#4 4 years ago

If the slingshots are working, the problem is NOT with the 1 amp fuse under the playfield. The 43 volts that powers the solenoids is daisy chained from one solenoid to another. You likely have a break in the chain. If you have a digital multi-meter (DMM), start at the 1 amp under the playfield use and see if you have 43 volts DC (you should). Then, follow yellow wire as it moves from the slingshots to the other solenoids under the playfield. I suspect you will find a yellow wire broken off from one of the solenoid tabs.

Promoted items from Pinside Marketplace and Pinside Shops!
From: $ 20.00
Playfield - Protection
UpKick Pinball
 
$ 18.95
Eproms
Pinballrom
 
$ 199.95
$ 9.95
Eproms
Pinballrom
 
$ 40.00
Gameroom - Decorations
The Flipper Room
 
$ 25.00
Cabinet Parts
Volcano Pinball
 
$ 18.00
Electronics
Yorktown Arcade Supply
 

You're currently viewing posts by Pinsider BallyPinWiz.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/skateball-playfield-solenoids-out-playfield-fuse-ok?tu=BallyPinWiz and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.