Skateball
Bally, 1980You're currently viewing posts by Pinsider jdoz2.
Click here to go back to viewing the entire thread.
I put and alltek ultimate MPU in my skateball and everything works fine minus the top left display always displays numbers. When you play a two player game the display has all 9's, but the segments move around when you score. Its almost like the 9's are overlayed on top of your score. Kinda weird and I have no idea why its doing this. Is it the MPU or something else?
Quoted from CNKay:I would think that if everything worked before you put in the new board that it is a misplaced connector and or bad connection. Usually impossible to put in connectors wrong but may a pin inside the connector for the player 2 display broke or if a ribbon cable off by one pin. Just a guess. Recheck your work.
It was totally dead before I put the Altek board in. The sound is a little flakey too, so Im sure the connectors need some help, so I guess Ill start ordering that stuff.
Quoted from dothedoo:If you switch positions with one of the other displays does the problem follow?
I switched the displays and the problem followed the display. I guess Ill just order up a new one.
You're currently viewing posts by Pinsider jdoz2.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/skateball-help-alltek-mpu?tu=jdoz2 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
