(Topic ID: 210680)

Skateball backglass advice wanted


By RoyGBev

2 years ago



Topic Stats

  • 7 posts
  • 3 Pinsiders participating
  • Latest reply 2 years ago by RoyGBev
  • No one calls this topic a favorite

You

Linked Games

Topic Gallery

One image has been uploaded to this topic. (View topic image gallery).

20180223_163729_resized (resized).jpg

You're currently viewing posts by Pinsider roygbev.
Click here to go back to viewing the entire thread.

#1 2 years ago

Just got a Skateball that has a bit of water damage to the backbox. Probably the reason the bg paint is about to start coming off. Luckily it appears no pieces are missing yet (see pic). But from the front it has that separated look in large sections.

I'm thinking I'll try to remove that nasty brown stuff at upper left, at least in the translucent part. Then blast it with three coats of Triple Thick, then use plastic wrap and weights to keep the peeling parts down while it dries.

The metal bracket is on stuck on pretty well and I don't want to try removing it. Slight rust but I'll try to polish or paint it.

I'll accept that it will always have that separated look, but if I can keep all the paint there I'll consider it a success.

Anyone have different advice?

20180223_163729_resized (resized).jpg

#3 2 years ago

Thanks for the input. Update: The brown stains are more noticeable in real life than in the pic. I tried gently using naptha, then Goo Gone, then Goof Off. Nothing. Then I tried Novus 2 and that got it right off. Cleaned all the translucent areas except where it's separated and cracked. Noticeably whiter, hopefully will make it slightly brighter when lit up. I don't think I removed any significant amount of white paint.

I took the pic right after I brought in indoors from the car. As I wrote about it, it started peeling and cracking more and more. It's 55 degrees and raining, and I guess the change in humidity got it going. So I worked fast: Put it out on the deck and sprayed it thick, used plastic wrap and heavy books on it. I think I got it nice and flat, will let it dry 24 hours, then assess it again.

#4 2 years ago

Another update: After spraying the glass and using the books and plastic wrap as described in the previous post, the repaired area looked good. But another section then decided to crack and come up off the glass. So I fixed that section, again another 24 hrs to dry, and while that was drying two more very large sections started coming up. Finally this morning I decided to fix it one more time. I was lowering the third of three large pieces of plastic wrap when it stuck too early and moved a piece out of place. I tried to carefully move it back but that messed another part up.

At that point I'd had enough. To those with player condition Skateballs with no glass at all, I apologize. But in my view the thing was so riddled with paint cracks it wasn't even a good wall hanging. I got a bit of satisfaction seeing it shatter against the wall of the dumpster.

#7 2 years ago

I have a Stern Big Game on order from them. Hopefully will be nice. And I found another original Skateball glass.

Promoted items from the Pinside Marketplace
$ 149.95
Boards
Allteksystems
From: $ 20.00
Cabinet - Other
Rock Custom Pinball
From: $ 45.00
Displays
PinballSolutions.eu
$ 40.00
Gameroom - Decorations
The Flipper Room
$ 9.00
Cabinet Parts
Third Coast Pinball
From: $ 140.00
From: $ 40.00
Cabinet - Other
Rock Custom Pinball
$ 9.00
Electronics
Yorktown Arcade Supply
$ 49.99
Electronics
PinballElectronics.com
$ 119.95
Boards
Allteksystems

You're currently viewing posts by Pinsider roygbev.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside