Flash Gordon
Bally, 1981Looking for help on Flash Gordon. I replaced all of the drop targets, but when I did the single drop target I forgot where a piece went (the L brace in the picture) target had worked before and coil works, but when I start a game this target doesn’t go up. I assume this piece is integral but can’t seem to get it to fit anywhere
image (resized).jpgIt looks like there is a small part missing or broken off of your pull-back armature. It’s closer to the playfield. You appear to be missing the spring too.
Basically as the diagram shows when the small coil on the back side pulls in the armature, it knocks the target down.
I’m not sure if the L piece you are highlighting is part of a fix for the broken(?) armature. It does not look original.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/single-drop-target-issue-on-flash-gordon- and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Thorndale, PA