Thanks
Bat relay coil
The metal sleeve is stuck in the coil. Not sure if one piece design and supposed to be that way. If not does that mean coil needs replacing?
Today I put in a set of new 10amp slow blow fuses (good branded ones -
/ not cheap ones). Turned game on. No movement on any of the scoring reels. Pitching mechanism works. Bat worked too, but seemed weak.
Pressed all of the base hit switches on playfield and scoring man unit worked correctly . Outs clicked, but did not register anything or light up on the back board.
Inning counter advanced when I hit game button (did not reset)
And ...
One of the new fuses blew (the one marked “Normal Line - 50 volt). Below are some photos showing the fuse bank and on / off switch (looks like it’s been modified).
The game also came with a copy of the wiring diagram (World Series 1962). I can’t seem to sync the diagram with what I’m seeing inside the unit.
Guessing fuse is first thing I need to address, but not sure how to go about finding the culprit???
Thanks so much for the help!0F6FA590-E319-4502-A88A-11F513EB1755 (resized).jpeg9CDC7DDA-A9FA-4427-9FF1-E832F2C823B1 (resized).jpeg9CDC7DDA-A9FA-4427-9FF1-E832F2C823B1 (resized).jpeg9CDC7DDA-A9FA-4427-9FF1-E832F2C823B1 (resized).jpeg
1D155B02-223B-422E-9C22-6618FDB63B17 (resized).jpegDC34CDE1-A05D-447C-B996-9F94DF8F02B5 (resized).jpeg40D3BAFC-1929-4916-9B60-C3F1E8AE5B15 (resized).jpeg