Asteroid Annie and the Aliens
Gottlieb, 1980
Big Foot
Bally, 1976
Global Warfare
Game Plan, 1981
Joker
Bally, 1969
Q*Bert's Quest
Gottlieb, 1983
Wrecking Ball
Williams, 1987You're currently viewing posts by Pinsider captainneo.
Click here to go back to viewing the entire thread.
Quoted from PACMAN:Not exactly rare, but one of a kind
Screen Shot 2014-11-17 at 10.28.... 1.3 MB
Screen Shot 2014-11-17 at 10.28.... 1.5 MB
Screen Shot 2014-11-17 at 10.29.... 1.7 MB
Screen Shot 2014-11-17 at 10.29.... 2.7 MB
Screen Shot 2014-11-17 at 10.30.... 2.0 MB
Screen Shot 2014-11-17 at 10.30.... 1.7 MB
Screen Shot 2014-11-17 at 10.29.... 2.3 MB
Screen Shot 2014-11-17 at 10.29.... 1.9 MB
I love this game. used to play it all the time when it was new.
Couple rare gems, are Miss World (1 of 4), Orbitor 1, Prototype Radical with rear VUK (don't own anymore), Robot, Locomotion (rare production runs) I have several low production run games, like Pinball Magic (1200 or less), Atlantis and torpedo ally. Also have 2 uncut translite sheets for Addams Family original. Plus a couple of other odds and ends.
full game front shot.jpg
finished right side.jpg
IMGA1409.JPG
IMGA1422.JPG
almost finished 001.jpg
Robot pictures with playfield done 004.jpg
basement 6-30-13 003.jpgQuoted from Blackjacker:So much nicer than the piss-yellow production version!
Maybe piss yellow/green if you drank antifreeze. I like the yellow version better. If you put that in the game, you know how hard it would be to even see that ramp. Way to dark and would blend in to much.
Man, there are a ton of games in that pile i'd love to have. I love euro games. 
If you want to ship all your euro titles over here, i'd be happy to store them for you. 
Quoted from SilverUnicorn:Some more paperwork I found.....most of these are art ideas for the "Alias Defenders" or "The Defenders" machine that was never produced, and some from TOTAN and CV.
DSCF8764.JPG 128 KB
DSCF8763.JPG 128 KB
DSCF8765.JPG 167 KB
DSCF8766.JPG 134 KB
DSCF8767.JPG 114 KB
DSCF8768.JPG 194 KB
DSCF8769.JPG 108 KB
DSCF8770.JPG 105 KB
DSCF8771.JPG 249 KB
DSCF8772.JPG 326 KB
DSCF8773.JPG 198 KB
even the middle girl looks like she's from the 80's.
Quoted from Aurich:Yeah, when I found that out I went
Quoted from gooterman:Mr Game Motor Show
Cirsa/unidesa/stargame White Force (yeah.. it sounds bad)20141216_005824.jpg 215 KB
20131121_212754.jpg 239 KB
20141216_005832.jpg 216 KB
YOu buy that from Mike? He told me there was only 1 in existence and he had it. I almost bought it from him, but it was in too shitty of condition and was unsure if I could get the parts to make it play worth a shit.
Quoted from gooterman:This did come from mike, but it's not the one you're talking about.
He still has the Mr Game Fast track. That was the prototype of Motor Show. It has the same playfield, but a different cpu, video board, b&w monitor. It doesn't have the video game challenges... just text and scores. I guess it died at some point during expo... but i haven't got anywhere close to catching up on all the other rare and unusual pain in the butt projects yet to even think about looking at it.
It took a shit huh? Glad I didn't buy it. I would of, but his price on it changed from hour to hour. One min I talked to him it was reasonable. Talked again. outlandish price. Again, medium, Later he bumps into me and wants to talk about it again. Next time, price is through the roof again. I think he thought I wanted it worse than I actually did.
Quoted from vid1900:Kanada wants to pay you latter for a Fix It Felix from you toady.
that reminds me of this clip
I have a prototype Cirqus Voltaire playfield Cad I got from Jpop and he signed it. Still waiting to frame it and hang it up in my gameroom.
Quoted from pinballslave:As requested previously, here's some pics of my Io Moon that I was able to play and photograph over the Christmas break
Backglass and display.jpg 169 KB
Full playfield.jpg 252 KB
Flipper view.jpg 212 KB
Glowing rock pops.jpg 229 KB
Upper playfield.jpg 293 KB
Full view.jpg 236 KB
Dead astranaut on playfield.JPG 168 KB
Upper right playfield.jpg 305 KB
i've always loved the look of this game. Still tempted to buy one, but I wish the rules were more involved. Great setup, just not done good for playability.
Quoted from vid1900:Probably worth $1000 today
Someone was working on repos...didn't it ever get released? they had it almost perfect to the tee. Mold was made for the reflection stamping.
that was 3 years ago. They told me then, the effect wasn't working right because they needed the correct angles to reflect the light. But said they were working on it. Didn't know if they ever fixed it or not. Never followed up as I don't own or have interest to own a Wh20.
Quoted from j_m_:here are pics of the uncut joust playfield plastics (the u.s. quarter in the lower left corner is for size reference)
IMG_0311.JPG 153 KB
IMG_0309.JPG 169 KB
repo or NOS?
Quoted from LorenZ:Zaccaria Brothers already did it in 1982 with Pinball Champ '82.
zac2.jpg 64 KB
zac.jpg 25 KB
Yup, a lot of my zacs have headphone jacks already installed from the factory.
gotcha. I didn't even know you could add titles with the same name multiple times. You sure do love A.G.
I guess, if you have unlimited space. I don't think there is anyone on this site that has unlimited space.
Quoted from pinballslave:Here's another game you don't see so often... in fact I've only seen it once! I love the captive ball system on this one and the way the energy from the playfield ball is transferred to it! I was very confused when I first got it because I thought the captive balls had been removed... I was also puzzled why the targets were so high up... then the penny dropped and I realised the captive balls aren't half as captive as I thought!!
full view right.jpg 76 KB
Data section on backglass.jpg 75 KB
front overview.jpg 79 KB
left captive ball.jpg 85 KB
Lower playfield viewed from head... 275 KB
Playfield birds view.jpg 250 KB
Ramp entry with spinners.jpg 81 KB
right captive ball from side.jpg 75 KB
upper flipper looking from head.... 195 KB
Under ramp plastic upper left.jp... 164 KB
Upper playfield from head.jpg 238 KB
upper flipper play area.jpg 79 KB
right captive ball and pops.jpg 77 KB
View from lower arch.jpg 158 KB
Right sling from above.jpg 213 KB
ramp exit diverter.jpg 78 KB
Plastic under ramp upper right.j... 71 KB
Playfield lady right.jpg 83 KB
Backglass-522.jpg 72 KB
middle targets.jpg 65 KB
Upper playfield lit.jpg 187 KB
upper rollovers.jpg 74 KB
This is why I love Euro games so much. they always try new things that is out of the box. US games have a lot of the same shit rehashed. Love the looks of this game. hopefully the rules are little better than some of their other stuff.
Btw, how high is that head? looks like it's up there with Banzai run.
Quoted from pinballslave:I sent these pics to the IPDB, but for some reason they didn't put them up... so here they are... I love the artwork on this beast!!
Backglass full.jpg (Click image to enlarge)1
Flipper view.jpg (Click image to enlarge)1
Playfield full.jpg (Click image to enlarge)
Upper pf and score area.jpg (Click image to enlarge)
upper rollovers.jpg (Click image to enlarge)
upper left plastic.jpg (Click image to enlarge)
Top right plastic.jpg (Click image to enlarge)1
Top left plastic.jpg (Click image to enlarge)
Central playfield.jpg (Click image to enlarge)1
mid left playfield.jpg (Click image to enlarge)
Backglass woman.jpg (Click image to enlarge)1
that looks tits.
I have an uncut sheet for TAF translight that was taken before the white silkscreening was done to the back.
Quoted from ronsplooter:Managed to pick up a Tecnoplay X Force yesterday. The game seems to be in great shape but if anyone has any spares they'd be willing to sell them please give me a shout
awesome. Does it use the Gen 2 zaccaria boards like my tecnoplay scramble uses?
You're currently viewing posts by Pinsider captainneo.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/show-off-your-rareprototype-pinball-stuff?tu=captainneo and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Burlington, WI