This is painted and cleared. Had to scan my pinball refinery metal apron to try to get a paint code so we could match it. Like most have said pictures really doesn't do it justice. Looks awesome in the light.

2016-02-05_10.17.34_(resized).jpg
2016-02-06_11.09.17_(resized).jpg
2016-02-06_11.09.01_(resized).jpg

Oh and The Getaway.

2016-01-18_11.17.45_(resized).jpg

2016-01-18_11.18.33_(resized).jpg

2016-01-18_11.17.56_(resized).jpg

2016-02-23_13.52.53_(resized).jpg

It's a candy red. The Apron from Steve had more metal fleck than we could get here but it was still a perfect match color wise.

Just the photo. It's got new decals. Full resto inside and out.

What machine and what is the colour. Very nice.

Just curious what you guys are paying there. Here it's around 350 for all the armour excluding coin doors. No one seems to want to give them a go. Hence my IMVE door from Steve @ Pinball Refinery. It hurt cost wise until I fitted it and then it didn't seem so bad. Loving this thread. Some really beautiful machines.

ulmpharmd, the light up aprons are they from Joey?

Orange is a tough one. You can have too much. I'd keep it black also.

Yeah think they are out of stock or were the last time I looked. I put one on my TRON pro. Fitted some 6led pads under neath. Come up well.

Yep they are the ones I was thinking of, thanks. Pretty sure they supply Joey. Cheaper through Pinball dreams last time I looked. My CV may be sold next weekend. If not I might have to get the apron as they really do look nice. A mate had one on his MM MB and LOTR LE

Yeah not a fan of what they did with RBION. But can see with the right graphic it could work very well. Snake skin on METLE. for example.

I put some red t Mold on my Spidey Dave and it came up really nice and matches in with the trim. Didn't take pic sorry.
The GoT is going to come up nice with the gold trim mate.

The very nature of powder coating is resistant to chipping. Hand rails on public transport are powder coated yellow and resist chipping than older paint styles. Having said that spraying and then clearing has a similar effect as the hard clear is less prone to chipping than 1 coat paint. Here's my IMVE and it's holding up great.

2016-02-06 11.09.01 (resized).jpg

That is the best looking one yet, way better than the green and don't get me started on how bad the white looks.

The colour really suits the game fantastic.

Here's mine to give you an idea. Realy finished the full resto off well.

And yes i removed the plastic protectors and fitted the metal Stern type.

2014-08-17 12.46.40 (resized).jpg
Scott's Junk 170 (resized).jpg
Scott's Junk 175 (resized).jpg
Scott's Junk 176 (resized).jpg

Shrimp lol. Shame I had to sell it but you can't have them all. Although this one carries some of the most regret as it's such a great game.

Black chrome does look very nice. A mate of mine did his MM a little while ago after getting his IJ gun done in it. I'm sure Ron would be doing some very nice black chrome.

Can't beat chrome for a lot of games. I really like powder on SOME games but it doesn't work on all.
For me personally i haven't seen a game with white that i like. It just seems to in your face as opposed to something that really blends with the game.
Chrome WH20

2014-08-17 12.46.40 (resized).jpg

That should come up very nice Paul. Love to se the pix when it's done. I had STLE and was considering chrome but couldn't bring myself to go over the great job that Stern did with the powdercoating on this game. A bit like Hulk LE it was really top quality or at least mine was. The same can't be said for my MMR. It is only basic powder, even if they cleared over the top to lift it and give it some gloss like GoT would have been better imho. Remember mate pix or it didn't happen.

Some more chrome from my old collection a few years back for the chrome connoisseurs fiberdude120

2012-02-28 12.18.45 (resized).jpg
2015-08-16 09.43.02 (resized).jpg

But then you need to play with these on if you have bad OCD like me

2016-02-28 17.07.07 (resized).jpg

Sorry back to powder coating lol

File 17-1-17, 11 24 37 am (resized).jpeg

I can't bring myself to do it. They really did a nice job on it from the factory.
The same can't be said for my MMRLE black. Looks the poorer cousin. I'm thinking of clear coating the MMRLE to lift it. Either that or a nice candy blue/purple mix.

Best attempt i've seen so far, well done.

Mate just did one in white. Didn't look right even with all the white mountains and white Bigfoot. He took one look at my chrome one and said "I have to redo it" I know it's personal taste but I haven't seen a white yet I like. It just comes across as too stark. I posted this before but here's another.

2014-08-17 12.46.40 (resized).jpg

That’s one very nice BSD.

That matches it perfect. Nice reptilian skin look.