Here is my DIY tool called "Multi-Board"
I often need a little workspace on my Pinball machines, which has a good stand and does not move. So I decided to build this DIY board - with foam rubber and magnetic strips. you can stick and secure your screws and tools on the magnetic strip, use it as a stand/holder for the speaker panel and translite (so it doesnt move) and you can flip it for a mobile solder station.
update... installed 4 more neodym magnets to hold heavier tools or to magnetize screws, see last pic
cheers
Chris
2 (Small) (resized).jpg3 (Small) (resized).jpg4 (Small) (resized).jpg5 (Small) (resized).jpg6 (Small) (resized).jpg7 (Small) (resized).jpg