Wow, impressive!

Got the leds into my gate, think it’s looking pretty good! Just sorting out the wire bundles.

Also added a Jada 1/43rd Jeep with LEDs in the headlights and a small strip of led tape light underneath, replaces the right flasher using the original bulb base.

073A93FE-0CFB-45F4-A9F6-85D040613449 (resized).jpeg

8007F10C-00E3-42BB-BEFA-B85F382378D4 (resized).jpeg

B6E2B310-C27A-468E-A75A-9CE104AC28D2 (resized).jpeg

E39741CB-80DE-471E-9A37-AB5B2AF4EEF3 (resized).jpeg

Finished my gate. Think it came out pretty sharp!

CA23F4C2-DEEC-4667-9398-00064552FEFF (resized).jpeg

Yea for sure, now that I have the design to where I like it. I’ll build and paint a couple this week and open a pinbiz shop.

Do you like the red/amber light setup? I think it complements the ramp lighting well. I can do all red too. Also with or without the little clear flames but I think the flames look pretty neat.

It’s plug and play with the original wiring too.

45BE5102-837E-490A-8A42-EBA2A264C334 (resized).jpeg

E22BA50D-8618-45AC-9E48-9B27AAAEA011 (resized).jpeg

Ordered a set of scoop protectors off eBay. Arrived in a week from Europe. Installed them last night.

62FD64D9-F0E9-403D-A972-A9AAA942909A (resized).jpeg

713387A1-3CAE-4690-8E7C-B19B93D3CE9C (resized).jpeg

Looks pretty good. What size LED are you using in the holders?

Nice stuff! This is a really good game to mod eh, lots of space to put toys and lighting.

I did the same thing with the flasher socket there to power my jeep’s headlights and a piece of strip light for some white underglow for it too. Works really well.

No damage, the Jeep just won’t work if it’s wired backwards.

Nice, you decked out that JP really fast!