Just picked one of these up a month ago. One question if someone can look at there’s for me. Where the ball drains is one of those red posts. Is it supposed to have a 5/16 rubber ring on it? It was not included in the rubber kit I have and the Manuel doesn’t say.

Thank you and have a merry Xmas.

Hey I just noticed that this game has a knocker with a bell in the manual. Mine is missing but the bracket is there as well as the plug coming from harness. Anyone have a bell and knocker assembly in their game? Got any photos of how the bell is installed so I can source the parts. I found the knocker assembly without a bell on PB resource's website. Also if you do have it when does the game trigger it? Says the bell is 5 inches but don't really see any clearance if mounted straight up. thanks

Finally got my scoreboard fixed and will be delivered on Friday. I’m missing the hardware to attach the scoreboard pcb to the front plastic piece. Anyone have any photos or know what type of hardware is used? Thanks.

The motor probably needs a rebuild, can see if Marco still has one. I got one last year from them for around 100$. If they are out of stock you can send it off to pinball resource for a rebuild for the same cost. My board inside the coin door had a switch for tournament mode. Sold the pin earlier this year or I’d get you a pic.

I can help with a couple. Basket motor is sealed and can’t be lubed. Will have to send that out to Steve young at pinball resource for a rebuild. It’s 100$ he did mine for. the score board look up Jerry clause on here and Facebook. Mine was really messed up bad and he fixed it. He is a magician when it comes to this led board.
2B7FE109-CB36-4682-9555-7B677D11CC44 (resized).jpeg09692CE9-07F5-4867-A718-A60AD4301C99 (resized).jpeg

Someone just posted on Facebook tonight a completely populated playfield for a steal of 250$

95FF3402-932E-4136-A54F-CD35C3FCD3D8 (resized).jpeg