Only half the lights work. Tried to unplug and plug but problem still.
You're currently viewing posts by Pinsider dannunz.
Click here to go back to viewing the entire thread.
If it was a fues would all the back box gi be out?
Quoted from LTG:Meter in hand, set to AC. Don't measure AC to ground measure hot to common. For a start measure AC onto and off of the power driver board and see if GI power is going in or out. That will help you narrow down where to go next.
This is assuming you pulled GI fuses and checked with a meter ?
LTG
I pulled the meter out and checked j120. There is no voltage at the 2 pins for the gi that is out. The other 2to pins have 6the volts. Now do i have to take the board off and re flow the salter at those two spots?
You're currently viewing posts by Pinsider dannunz.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/shadow-tech-help-backbox-gi?tu=dannunz and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.