Well after moving all my games out of Illinois I have finally set them all up.
I have minor issues with Shadow and F-14. (I'll make a separate post for F14)
My Shadow has a lower right dead flipper. The other three and the rest of the game works 100%.
I have looked at the wiring and do not see any noticeable issues.
The right button and assembly look fine as well.
I am new to working on pins and looking for guidance as to what to try or look for next.
Switch test - do both optos work on the right flipper button opto board - push the button in slowly - do they both register on the DMD ?
Coil lugs - dig around the wires for poor solder joints, especially the thin wire from the coil to the lug, they can have a break or crack you can't see.
LTG : )
Quoted from LTG:Switch test - do both optos work on the right flipper button opto board - push the button in slowly - do they both register on the DMD ?
Coil lugs - dig around the wires for poor solder joints, especially the thin wire from the coil to the lug, they can have a break or crack you can't see.
LTG : )
I thought both optos worked, but I will check again tonight.
I will recheck the wiring as well.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/shadow-one-dead-flipper and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Lanesville, IN