I have a SEGA Star Wars Trilogy machine that is blowing the F21 fuse. Curious if anyone else had has this issue?
You're currently viewing posts by Pinsider pinballgurus.
Click here to go back to viewing the entire thread.
I have a SEGA Star Wars Trilogy machine that is blowing the F21 fuse. Curious if anyone else had has this issue?
The ground on BR3 only tones out for continuity in one direction??? All the others bridge rectifiers tone to ground both directions. This can’t be normal???
So I’m a little confused since they all show a ground connect except BR3 when I reverse it.
Quoted from zaza:On page 107 of your manual you could have seen that the 2nd bridge is not connected to GND
So today I unplugged the J6 connector and the fuse didn’t blow. I didn’t see anything blown on the board. I’m looking at the schematic now, it appears to the brown/red wire, which isn’t a ground on the playfield side.
I believe that’s for the flipper magnets.
Quoted from pinmike:Ok 3A 250V Slo blo For coils but does not state which coils it is??..if you look at the bottom of that page it states left and right flippers are the same 3A 250V slo blo.
You're currently viewing posts by Pinsider pinballgurus.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/sega-star-wars-trilogy-blowing-f21?tu=pinballgurus and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.