I have a SEGA Star Wars Trilogy machine that is blowing the F21 fuse. Curious if anyone else had has this issue?
The ground on BR3 only tones out for continuity in one direction??? All the others bridge rectifiers tone to ground both directions. This can’t be normal???
On page 107 of your manual you could have seen that the 2nd bridge is not connected to GND
Ok 3A 250V Slo blo For coils but does not state which coils it is??..if you look at the bottom of that page it states left and right flippers are the same 3A 250V slo blo.
So today I unplugged the J6 connector and the fuse didn’t blow. I didn’t see anything blown on the board. I’m looking at the schematic now, it appears to the brown/red wire, which isn’t a ground on the playfield side.
Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside