Need a little help.
I'm getting no power to my sound board to even get a speaker hum.
I know the sound board works, because I tested in another stern.
I need to know where the power is coming from and what I might check to get it flowing.
You're currently viewing posts by Pinsider brenna98.
Click here to go back to viewing the entire thread.
Need a little help.
I'm getting no power to my sound board to even get a speaker hum.
I know the sound board works, because I tested in another stern.
I need to know where the power is coming from and what I might check to get it flowing.
Ok. So, the game boots and plays.
Using an alltek MPU. I get all the flashes.
I'll check pin 11 on J3 for power.
the schematics say pin 11 J3 on the SDB is where the 11.9 volts come from (TP-5)
But, the schematic says that wire goes to the MPU, then I don't see where it comes out of the MPU the the sound board.
You're currently viewing posts by Pinsider brenna98.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/seawitch-sound-help?tu=brenna98 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.