(Topic ID: 244038)

Seawitch J1 AS-2518-18 Rectifier Board


By Marv

4 months ago



Topic Stats

  • 9 posts
  • 4 Pinsiders participating
  • Latest reply 4 months ago by Marv
  • No one calls this topic a favorite

You

Linked Games

Topic Gallery

There have been 3 images uploaded to this topic. (View topic image gallery).

J1 (resized).png
IMG_20190530_073439.jpg
J1 (resized).png

#1 4 months ago

Hi,

Can anyone take a picture J1 Connector on the AS-2518-18 in their Seawitch pinball please?

I'm not sure if i am missing some wires here:

Cheers
J1 (resized).png

#3 4 months ago

Cheers, already looked there - just wanted a picture of one in the 'wild'.

#4 4 months ago

Here's what mine looks like:

1 red
2 empty
3 empty
4 empty/key pin
5 empty
6 blue/white
7 blue
8 white

IMG_20190530_073439.jpg
#5 4 months ago

According to the guide the red and white wires are back to front, but on the schematics it says Pin 1 is Red and Pin 8 is White.

J1 (resized).png
#6 4 months ago
Quoted from Marv:

According to the guide the red and white wires are back to front

The guide is based on Bally who have white at pin 1 and red at pin 8. Stern did it opposite.
Red and white are for the general illumination which is AC anyway. But best to follow the manufacturer coloring layout.

#7 4 months ago

So i've re-pinned the connectors on the TA-100 all showing correct voltages. I can't seem to get the 5v on the SDU-100 Rev C.

- Re-pinned connectors J3 and J4
- Rebuilt 5v section (apart from 2.2 Cap)
- New Voltage Regulator (tested on bench)
- Ground mods done and 5v TP1 -> Tp3

Now i can give the board 12v on the bench and all is well, but as soon as i plug it into the backbox no 5v, i've checked pin 12 on J3 and its giving out 12v unreg.

Its got me scratching my head some what..

Any ideas?

#8 4 months ago
Quoted from Marv:

I can't seem to get the 5v on the SDU-100 Rev C.
...
- New Voltage Regulator

Post a clear picture of the 5V regulator - there are low spec China fakes going around..

#9 4 months ago

Sorted it, the TA-100 was missing a jumper.

Promoted items from the Pinside Marketplace
From: $ 45.00
Displays
PinballSolutions.eu
3,200 (OBO)
Machine - For Sale
London, ON
$ 3.00
Playfield - Decals
Doc's Pinball Shop
From: $ 13.00
Electronics
Third Coast Pinball

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside